Search the SS7 Applications Guide 1:



Contents


Configuring IO Cards and the SS7 Interfaces
Configuring TDM Signaling Channels
Configuring the AMC348 and the SS7 Interfaces
Configuring the ATM Channels
Configuring Annex A Signaling Channels
Configuring Network Appearances
Configuring MTP Internal VM Communication
Configuring Linksets and Links
Configuring Routesets and Routes
Reserved IP Ports for the DSC 8000 and DSC SWe (on MA-RMS)
Reserved IP Ports on the Signaling Platform 2000
Reserved Application IDs for SS7 Applications
SP2000 Signaling Management Message Codes


Note

The first four sections of this guide (from Configuring IO Cards and the SS7 Interfaces to Configuring Annex A Signaling Channels) are only applicable to the DSC 8000, DSC SWe (on MA-RMS), vSP2000 (on MA-RMS), and SP2000.


Note

The DSC 23.0.0 release is not available on the 3U/13U Hardware platforms.  Any information contained in these documents are for historical reference only.  References to the SP2000 refer to the vSP2000 software platform.

Note

For information about SS7 data measurements and reporting, refer to Data Measurements Reference.

  • No labels