Table of Contents
Use the Network Page
Configure WAN Interface Settings
Configure NAT Settings
Configure VLAN Support
Configure WAN VLAN Settings
Configure Customer Networks
Configure the 802.1x Supplicant
Configuring T1 Settings
- Configure the T1 Physical Layer
- Configure the T1 Link Layer
- Configure T1 Ports
- Manage the EdgeMarc Daughter Card
Managing T1 Diagnostics
Mobile Diagnostics
Configuring PRI
- PRI Overview
- Configure ISDN PRI
- Configure Network Side ISDN PRI (PRI/UA)
- Configure Client Side ISDN PRI (PRI/GW)
- Configure Message Capture Settings
- Use Cause Mapping
- ISDN Setup Message Manipulation
Configuring High Availability
- High Availability Overview
- Configure High Availability Settings
- Administratively Disable High Availability
Configure DHCP Relay
Configuring the DHCP Server
Configuring Traffic Shaping
- Traffic Shaping Overview
- Use the Traffic Shaping Page
- Configure Basic Traffic Shaping
- Configuring Advanced Traffic Shaping
Configuring Pass-Through Rules
Configuring Subinterfaces
Configuring Proxy ARP
Manage Switch Ports Settings
Configure Static Routes
Configure Dynamic DNS
View Network Information
Initiate Network Restart
Use Network Test Tools
Configuring Firewall Traversal
- Update a Certificate
- Use the Firewall Traversal Page
- Configure Internal Client Mode Settings
- Configure External Server Mode Settings
- Configure Remote Client Mode Settings
Configuring WAN Failover
- About WAN Failover
- Configure WAN Failover Settings
- Configure WAN Failover Advanced Settings
- Configure Secondary WAN Settings
Configure VRRP
Configure SOC2 IP Settings
Configure Router Advertisement (IPv6)
This section describes how to configure the EdgeMarc to function in your IP network using the Network tab in the Configuration Menu:
Overview
Content Tools