You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Table of Contents
About this Page
  • This Interoperability Note describes how to configure a TDM port on a Mitel 3000 ICP PBX to integrate with the Sonus
    Unable to show "metadata-from": No such page "_space_variables"
    .  Also included is configuration information for integrating Exchange Unified Messaging to the Mitel PBX via
    Unable to show "metadata-from": No such page "_space_variables"
    .
Related Articles

Prerequisites

Requires Sonus 

Unable to show "metadata-from": No such page "_space_variables"
Version 3.0

Mitel 3300 ICP PBX, Version 9.0.0.41, T1, QSIG

Interoperation Notes

The following extension numbers are used within this document:

•  UMS Pilot Extension: 2562
•  Extensions enabled for Microsoft Exchange Server UM: 5100 - 5199

PBX Configuration

Use the following configurations to interconnect the Mitel to

Unable to show "metadata-from": No such page "_space_variables"
.

  1. Ensure that your Mitel 3300 ICP PBX has the necessary T1 PRI Module to Support T1 QSIG by navigating to: System Configuration / Units/Modules / Units Configuration Display.

    Unit Configuration Display

    Dual T1/E1 Framer Configuration

    Dual T1/E1 Framer Port Configuration




  2. Create Class of Service for your QSIG trunk by using the following path to create a Class of Service for the QSIG trunk: System Configuration / Trunks / Class of Service Options Assignment.

    Class of Service Options 1

    Class of Service Options 2

    Class of Service Options 3

    Class of Service Options 4

    Class of Service Options 5

     

     

  3. Create a Link Descriptor Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Link Descriptor Assignment.

    Link Descriptor Assignment

     

     



  4. Create a Digital Link Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Link Assignment.

    Digital Link Assignment

     

    Create Digital Link Assignment

     

     

  5. Add a MSDN-DPNSS-DASSII Trunk Circuit Descriptor by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI/MSDN-DPNSS-DASSII Trunk Circuit Descriptor.

    MSDN-DPNSS-DASSII Trunk Circuit Descriptor

    Create MSDN-DPNSS-DASSII Trunk Circuit Descriptor

     



  6. Create a Trunk Service Assignment by using the following path to create a Trunk Service Assignment: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Trunk Service Assignment.

    Create Trunk Service Assignment

     

     

  7. Assign Digital Trunks by using the following path to assign Digital Trunks: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Trunk Assignment.

    Digital Trunk Assignment

    Digital Trunk Assignment Form

     



  8. Add a Trunk Group for QSIG Using the following path: System Administration / Automatic Route Selection / Trunk Group Assignment. Next, create a new trunk group for QSIG and add trunk group members.

    Add Trunk Group

    Trunk Group Members Form

     

     

  9. Add a Route Assignment by using the following path: System Administration / Automatic Route Selection / Route Assignment.

    Route Assignment

    Add Route Assignment

     

     

  10. Add a ARS Digits Dialed Assignment by using the following path to add ARS Digits Dialed Assignment: System Administration / Automatic Route Selection / ARS Digits Dialed Assignment.

    ARS Digits Dialed Assignment

    ARS Digits Dialed Assignment Form

     

     

  11. Under System Option Assignment, set the following fields as follows:
     
    1) Route Optimization Network ID: Select a unique number.
    2) DPNSS/QSIG Diversion Enabled: Select 'Yes'.

    System Option Assignment

     

     

  12. Use the TDM document to configure

    Unable to show "metadata-from": No such page "_space_variables"
    .

    •  Configuring TDM ports on SBC Edge

  13. Use the EUM integration document to finished the voicemail integration.

    •  Configuring SBC Edge with Exchange 2013



  • No labels