Just Getting Started?
Go to the First Steps - Run Initial Setup and Install Latest Software/Security Patches page for important information regarding upgrades and the latest security fixes.
Do this first!
Getting Started
SBC 1000/2000 architecture, key features, product specifications, supported headers and standards, routing and policy management, and how to get started quickly.
Installation and Upgrade Guides
The Sonus SBC Edge installation guides are for people who are installing/upgrading SBC 1000/2000 or SBC SWe Lite.
SBC 1000/2000 Installation Guide
- SBC 1000 / SBC 2000 Requirements
- Installing SBC Edge Hardware
- Running Initial Setup
- Upgrading or Downgrading SBC 1000/2000
- Supported Platforms
SBC SWe Lite Installation Guide
User's Guide
The Sonus SBC Edge User's Guide is for system administrators, developers, testers - anyone who uses SBC Edge. If you are new to SBC Edge, start by exploring the User Interface. You may also find the Sonus SBC 1000/2000 Solution Base, SBC Edge Administration FAQ and Best Practices articles useful.
The Log Exchange - LX debugging tool is available at Log Exchange Documentation.
Developer Resources
These resources are for software developers who want to integrate, control, and maintain the SBC Edge through the REST Web Service. Take a look at the Sonus SBC Edge API User's Guide and the API Reference Documentation.
Administration FAQs
- How do I find a logged in user's IP address?
- What user authentication methods does the SBC Edge support?
- How are users authenticated on the SBC Edge?
- Does SBC Edge support advanced SIP matching?
- How does SBC Edge process network traffic through its Ethernet Interfaces?
- Is there a compiled list of pages for viewing SBC Edge-related software versions?
- When installing cumulative updates for Lync SBA, can we skip CUs in between?
Release Notes
Sonus Product Interoperability Testing
Best Practices
Provisioning examples, use cases and workflows to help manage and configure the SBC Edge.
- Working with the ASM and SBA
- Configuring SBC Edge for DNS Load Balancing
- Deploying an F5 Load Balancer in a PBX-SBC-Lync Topology
- Configuring the SBC 1000 for FXS Calling
- Downstream Deployment of SBC Edge in a PBX-SBC-eUM Topology
- Changing SIP Transport from MTLS - SRTP to TCP - RTP
- Call Forking Based on Active Directory User Attributes
- Call Routing Based on Active Directory User Attributes
- Configuring a Nortel PBX v4.5 to connect via TDM to the SBC Edge
- Configuring SBC Edge with Exchange 2013
- Configuring TDM ports on SBC Edge
- Configuring the Avaya S8300/8400/8500/8700 v.3.1.x to connect via TDM to SBC Edge
- Configuring the Mitel 3300 ICP v9.0.0.41 to connect via TDM to SBC Edge
- Configuring the QoE Feature
- How to Enable and Provide Log Files From SBC and SBA
- SBC Edge Security Hardening Checklist
- SIP Trunking Between SIP Border Elements
- SIP Trunking with Multiple IP Support
- Configuring SBC Edge for Standard and Mutual TLS Authentication
- Translating SIP Responses in SIP-SIP Calls Using the Pass-thru Peer SIP Response Code
- Configuring SBC Edge for Calling Party Category II-8 based Collect Call Blocking
- Use of Calling Extension in Transformation Table for ext=xxxx Input Value
- Changing SIP Transport Protocol from TCP to TLS in a PBX-SBC-eUM Topology
- Configuring SBC Edge with ITSP that Requires Digest Authentication with 401 Unauthorized Challenge
- SIP Message Manipulation Document Catalog
- Action Set Documents
- SBC for Dummies Series
- Configuring the RBA 3G4G Feature
- SIP Registration
- Deploying the Sonus SBC Edge
- Configuring SBC Edge with ISDN IDA-P Switch Variant
- Configuring SBC Edge for Broadsoft Compatibility
- Configuring SBC Edge for Multiple Media Streams
- Working with SIP Signaling Groups and NAT
- Packet Capture - Best Practice
- Configuring Calls to Emergency Services on PSTN Lines
- Configuring the SBC Edge for NAT Traversal
- Configure SBC Edge Auto Configuration for BroadWorks
- Configure SBC Edge with Tenor AF/AX for Fax
- How Sonus SBC Edge Transfers an RTP Stream Through Proxy Mode
- Using Lync Setup for E911 Configuration
- How Incoming Calls are Handled When the Server is Unreachable
- The SBC Edge Acts as an ICE Agent
- Configuring SBC Edge for One Number Fax in MS Exchange Environment
- Configuring the SBC Edge for On-Premise PBX Integration With Skype for Business
- Create an Office 365 Tenant
- Verifying Downloads With Checksum
- Powering Off and Deleting a SWe Lite instance
- Configuring SBC Edge for Music On Hold
- How Sonus SBC Edge transfers RTP stream though Proxy Mode
- Translating SIP Responses in SIP-SIP Calls Using 'Pass-thru Peer SIP Response Code'
- Deploying the Survivable Branch Appliance
Overview
Content Tools