Not supported by SBC SWe Lite in this release.
Requires Sonus SBC Edge Version 3.0
Mitel 3300 ICP PBX, Version 9.0.0.41, T1, QSIG
The following extension numbers are used within this document:
• UMS Pilot Extension: 2562
• Extensions enabled for Microsoft Exchange Server UM: 5100 - 5199
Use the following configurations to interconnect the Mitel to SBC Edge.
Ensure that your Mitel 3300 ICP PBX has the necessary T1 PRI Module to Support T1 QSIG by navigating to: System Configuration / Units/Modules / Units Configuration Display.
Create Class of Service for your QSIG trunk by using the following path to create a Class of Service for the QSIG trunk: System Configuration / Trunks / Class of Service Options Assignment.
Create a Link Descriptor Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Link Descriptor Assignment.
Create a Digital Link Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Link Assignment.
Add a MSDN-DPNSS-DASSII Trunk Circuit Descriptor by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI/MSDN-DPNSS-DASSII Trunk Circuit Descriptor.
Create a Trunk Service Assignment by using the following path to create a Trunk Service Assignment: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Trunk Service Assignment.
Assign Digital Trunks by using the following path to assign Digital Trunks: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Trunk Assignment.
Add a Trunk Group for QSIG Using the following path: System Administration / Automatic Route Selection / Trunk Group Assignment. Next, create a new trunk group for QSIG and add trunk group members.
Add a Route Assignment by using the following path: System Administration / Automatic Route Selection / Route Assignment.
Add a ARS Digits Dialed Assignment by using the following path to add ARS Digits Dialed Assignment: System Administration / Automatic Route Selection / ARS Digits Dialed Assignment.
Under System Option Assignment, set the following fields as follows:
1) Route Optimization Network ID: Select a unique number.
2) DPNSS/QSIG Diversion Enabled: Select 'Yes'.
Use the TDM document to configure SBC Edge.
Use the EUM integration document to finished the voicemail integration.
• Configuring SBC Edge with Exchange 2013