Requires Sonus
Mitel 3300 ICP PBX, Version 9.0.0.41, T1, QSIG
The following extension numbers are used within this document:
• UMS Pilot Extension: 2562
• Extensions enabled for Microsoft Exchange Server UM: 5100 - 5199
Use the following configurations to interconnect the Mitel to
Ensure that your Mitel 3300 ICP PBX has the necessary T1 PRI Module to Support T1 QSIG by navigating to: System Configuration / Units/Modules / Units Configuration Display.
Create Class of Service for your QSIG trunk by using the following path to create a Class of Service for the QSIG trunk: System Configuration / Trunks / Class of Service Options Assignment.
Create a Link Descriptor Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Link Descriptor Assignment.
Create a Digital Link Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Link Assignment.
Add a MSDN-DPNSS-DASSII Trunk Circuit Descriptor by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI/MSDN-DPNSS-DASSII Trunk Circuit Descriptor.
Create a Trunk Service Assignment by using the following path to create a Trunk Service Assignment: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Trunk Service Assignment.
Assign Digital Trunks by using the following path to assign Digital Trunks: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Trunk Assignment.
Add a Trunk Group for QSIG Using the following path: System Administration / Automatic Route Selection / Trunk Group Assignment. Next, create a new trunk group for QSIG and add trunk group members.
Add a Route Assignment by using the following path: System Administration / Automatic Route Selection / Route Assignment.
Add a ARS Digits Dialed Assignment by using the following path to add ARS Digits Dialed Assignment: System Administration / Automatic Route Selection / ARS Digits Dialed Assignment.
Under System Option Assignment, set the following fields as follows:
1) Route Optimization Network ID: Select a unique number.
2) DPNSS/QSIG Diversion Enabled: Select 'Yes'.
Use the TDM document to configure
Use the EUM integration document to finished the voicemail integration.
• Configuring SBC Edge with Exchange 2013