You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

 

SBC 1000 v2 Front Panel

#

Name

Description

1

Reset

System reset button. For more information, see Resetting SBC Edge to Factory Defaults.

2

USB Ports

USB ports for Sonus SBC 1000/2000 main board — see USB Ports detail section below

3

Power

Power Status LED

4

Alarm

Alarm Status LED

5

Peer Node

Peer Node Status LED (also recognized as the Locator LED)

6

Ready

Ready Status LED

7

Ethernet Port 1 - 3

Ethernet Ports 1, 2 and 3.

8USB PortsUSB ports for the Application Service Module (ASM) (when installed)
9Ethernet Port StatusEthernet Status LED
10DS1 PortsT1/E1 ports (when installed)

USB Ports

Usage

The Sonus SBC 1000 sports two pairs of USB ports (as illustrated above) — each pair serves a particular purpose:

Location

USB Port Intent and Usage Detail

 

2

 

These ports are optionally used to attach an external USB drive to store core dumps for troubleshooting (in the event they occur), and as a survivability mechanism for Active Directory Caching (when configured). See Support section below for proper usage.

 

8

 

If your Sonus SBC 1000 has a built-in Application Service Module (ASM), this USB port is primarily used for Updating the ASM Recovery Partition, and to (optionally) transfer files between a USB drive and the ASM.

Support

(warning) The following section is applicable only to the USB ports on location #2 on the Sonus SBC 1000's front panel.

For the Sonus SBC 1000/2000 system to properly recognize the USB thumb drive, you must ensure the following prerequisites are satisfied:

  • The USB storage must be of FAT32 file format.
  • The storage must be at least 1GB (or more) in size.
  • The SBC does not require a reboot after the USB drive is installed.

 

  • No labels