The SBC Easy Config interface includes a built-in, step-by-step setup configuration wizard, which enables end-users to quickly deploy the SBC in an Enterprise's Lync environment with a SIP Trunk Provider to an IP PBX. The SBC can be configured to use a SIP trunk to connect to an IP PBX using the automatic setup wizard as described here.
The following SIP Trunks are supported:
- Other SIP Trunk
- Softbank White Office
- Telstra Enterprise SIP Connectg
- KDDI SIP Trunk
- ATT SIP Trunk
- Verizon SIP Trunk
- NTT DOCOMO Officelink
NTT DOCOM Officelink, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC Edge 1000-2000 only.
Step 1 - Select Scenario
Make sure the SBC Easy Configuration wizard is running. Refer to Using the Easy Configuration Wizard.
- In the WebUI, click the Tasks tab.
- In the left navigation pane, go to SBC Easy Setup > Easy Config Wizard. The Easy Configuration screens open.
- Select the Application type (SIP Trunk ↔ IP PBX). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario – Field Definitions
Step 1
Application
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP PBX.
Scenario Description
Enter the name to describe the SIP Trunk ↔ IP PBX setup.
This value will be prefixed on all SBC configuration elements created by the Setup Wizard pertaining to this deployment.
Telephone Country
The country from which the SIP Trunk ↔ IP PBX originates.
Emergency Services
The E911 Elin number from the CompanyName field configured in Lync location services is used as the authoritative Callback number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, refer to Creating and Modifying Entries to Transformation Tables.
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options:
- ELIN Identifier
- E911/E112
- None
Emergency Callback Number 1
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Emergency Callback Number 2
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
PSAP Number
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
SIP Properties
Number of simultaneous SIP-to-Destination sessions.
Name (SIP Trunk)
The SIP trunk used for connection to the IP PBX. Valid options:
- Other SIP Trunk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- ATT SIP Trunk
- KDDI SIP Trunk
- Verizon SIP Trunk
- NTT DOCOMO Officelink
The SIP Trunk selected determines the field options displayed in Step 2.
IP PBX Panel
Valid options:
- Cisco CUCM
- Other IP PBX
- Avaya SM/CM
Step 2 – Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
Other SIP Trunk – Field Definitions
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
Other SIP Trunk
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol to use for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Use Secondary Border Element Server
Enables or disables the secondary Session Border Controller service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The Port Number used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to add a secondary server.
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
SoftBank White Office
WAN Link
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.
Signaling/Media Source IP
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.
SIP Server
The host IP address or FQDN for the SIP server.
Gateway ID
The ID used for authenticating with the router at the gateway of the network.
Gateway Password
The password used for authenticating with the router at the gateway of the network.
Confirm Password
Re-entry of the password for the router serving as network gateway.
Address of Record URI
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to add a secondary server.
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Telstra Enterprise SIP Connect Trunk
NAT Public Interface
The public interface used for Network Address Translation (NAT).
State
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).
Protocol and Port
Hard coded as UDP and Port 5060.
SIP Connect DNS IP
The IPv4 address used to create a Split DNS entry for the Telstra domain.
SIP Connect Domain/Realm
The SIP Connect Domain or Realm to which the specified IP address will map.
Authentication User ID
The User ID for use in authentication.
Authentication Password
The password to use when authenticating with the User ID.
Confirm Password
The re-entered password for confirmation.
Trunk Pilot Number
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to add a secondary server.
ATT SIP Trunk – Field Definitions
These fields apply if you selected ATT SIP Trunk in Step 1 - Select Scenario.
AT&T SIP Trunk
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Use Secondary Border Element Server
Enables or disables the secondary Session Border Controller service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to use a secondary server.
KDDI SIP Trunk – Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
KDDI SIP Trunk
SIP Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Called Prefix
Used for setting up transformation rules for the FMC service.
Address of Record URI
Address of Record of the client that is registered on the SIP server.
Static Host
Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port
Authentication ID
Specifies a user name to use in response to a challenge.
Enter Password
The password for the Authentication ID.
Confirm Password
Re-enter the password for the Authentication ID.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to use a secondary server.
Verizon SIP Trunk – Field Definitions
These fields apply if you selected Verizon SIP Trunk in Step 1 - Select Scenario.
Verizon Managed Service
Border Element Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Host
Host IP or FQDN.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP.
Port Number
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to use a secondary server.
NTT DOCOMO Officelink – Field Definitions
These fields apply if you selected NTT DOCOMO Officelink in Step 1 - Select Scenario.
For an IP PBX as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines.
NTT DOCOMO Configuration
Office Link FOMA-R
The Host IP address of the SIP Server.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the SIP Server. Default value: 5062.
CUG Domain Name
The FQDN of the SIP Server.
Host
Host IP or FQDN.
Protocol (IP PBX)
The Protocol used for communicating with the IP PBX. Valid entry: UDP or TCP.
Port Number (IP PBX)
The IP PBX port number used for sending and receiving SIP messages.
Use Secondary Server
Option to add a secondary server. Valid entry: Enabled or Disabled.
Secondary Server Host
Host (FQDN or IP) used for communicating with the Secondary Border Element Server. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol (Secondary Server)
Protocol used for communicating with the Secondary Border Element Server. Valid entry: TCP or UDP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number (Secondary Server)
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Secondary SIP Server. Default value: 5062. This field is available only when Use Secondary Border Element Server is Enabled.
Step 3 – Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ IP PBX with a Verizon Managed Service Trunk.
Step 3
Overview
Content Tools