In this section:

Related Articles:

Note

Applicable only for CALEA users.

Overview

This section outlines the commands to configure the PCSI LI on the S-SBC. For more information about the PCSI LI configuration, refer to PCSI LI Configuration.

Note
  • As a prerequisite to configure the PCSI LI on the S-SBC, ensure that the Call Data Channel (CDC) and the Mediation Server are enabled and running.
  • You can configure the PCSI LI with only the default address context.
  • For more information on the parameters (descriptions and supported values), refer to Intercept - CLI.
Note

The PCSI LI does not support the X2 interface.

Configuring PCSI LI on S-SBC

Use the following command to configure the PCSI LI on the S-SBC.

% set addressContext default intercept callDataChannel <callDataChannel_name> 
	interceptStandard packetCable
	vendorId ss8
% commit

Configuring CDC for Intercept Flavor as PCSI LI

For other options of configuring the intercept flavor as PCSI LI, refer to Configuring SBC For Lawful Interception.

% set addressContext default intercept callDataChannel CDC interceptStandard packetCable vendorId ss8
% commit