Use this object to view and/or edit egress Trunk group for the selected Signaling Profile. On the SBC main screen, go to Configuration > System Provisioning > Category: Call Routing > Profiles > Signaling Profile > Egress. The Signaling - Egress can be checked for a specific Signaling Profile. Choose the desired Signaling Profile from the drop-down box. The Egress window is displayed. Call Routing - Profiles - Signaling Profile - Egress Edit Window Call Routing - Profiles - Signaling Profile - Egress Parameters Parameter Description Calling Name Specifies whether to send the calling name as a part of the outgoing signaling protocol. Calling Number Specifies whether to send the calling name as a part of the outgoing signaling protocol. Charge Number Specifies whether to send the charge number as a part of the outgoing signaling protocol or not. Cip Specifies whether to send Carrier Information Parameter (CIP) as a part of the outgoing signaling protocol. Csp Specifies whether to send CSP as a part of the outgoing signaling protocol or not. JIP When enabled, the Jurisdiction Information Parameter is sent as part of the outgoing signaling protocol for Inter LATA and Intra LATA conformance. Olip When the option "send" is selected, the OLIP is sent as a part of the outgoing signaling protocol. Orig Called When the option "send" is selected, the OCN is sent as part of the outgoing signaling protocol. Redirecting When the option "send" is selected, the redirecting number is sent as part of outgoing signaling protocol. Visitor Ma When the option "send" is selected, the Visitor MA (Message Area) parameter is sent as part of the outgoing signaling protocol. Redirect When enabled, it includes the ANSI ISUP Redirect Capability parameter in the IAM that are sent on the egress trunk group if the parameter was received in the ingress IAM. Redirect Count When enabled, it includes the ANSI ISUP Redirect Count parameter in the IAM that are sent on the egress trunk group if the parameter was received in the ingress IAM. Redirect When enabled, it includes the Redirect Information parameter in any messages in either in the forward or in the backward direction before they are sent over the associated trunk group. ISUP Trusted This flag is used as part of the presentation restriction functionality to discard the calling party number or generic number of type additional calling party number at an international exchange as per Recommendation Q.731. Forced Clip The Forced CLIP field in the signaling profile of the egress Trunk Group is used to set the presentation of the calling number (or generic number) that is sent to the SBC in the Policy Response. Make the required changes to the required fields and click Save.To View and Edit Egress
Number
Number
Capability
Information
Network
Additional sections: