The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues. Customers should only configure the SBC using the supported interfaces (Ribbon SBC Core CLI, RESTCONF API, EMA, or RAMP).
Warning
Contents
Upgrade Flows
Selecting IaC or RAF to Upgrade SBC SWe
Pre-Upgrade Checklist - 7 Days Prior to Upgrade
Verifying the Existing SBC Software Version
Handling Duplicate IP Peers
Validating Checksum with 'Checksums Calculator'
Saving the SBC Configuration
Upgrading Firmware
Upgrading SBC Application
- LSWU Performance Metrics
- Upgrading SBC Application using EMA Platform Mode
- Live Software Upgrade using CLI
- Live Software Upgrade Using EMA
- MOP to Recover from Mismatch in 1:1 SBC SWe HA Session Estimates
Reverting SBC Application
Restoring SBC Configuration
Downgrading SBC Core Application
This section provides the sequence of instructions to upgrade the SBC application. This section also describes about saving and reloading the SBC core configuration.
Overview
Content Tools