The following procedure provides a high level overview to create a Load Balancer with the static mapping algorithm.
For all the general Load Balancer procedures, refer to Configuring Load Balancer Objects - General Procedures.
Add one or more routing slots to Target (refer to Create a Target Slot).
Weight does not apply to the Static Mapping algorithm.
Create one or more connections using the target and assign each connection to one of the routing slots defined in the target (refer to Create a Connection).
If you choose IPSec as the Connection transport type, you cannot create Connection Ports. Skip step 13 and go to step 14
For each connection, create one or more Connection Port objects and fill in the local and remote port numbers (refer to Create Connection Port).
Configure an ADN Connection in Diameter application with the same connection and slot as configured in the previous step. To see how to configure diameter applications, refer to Configuring the Ribbon DSC.
For Diameter, create a Transport Server on one of the local ports (refer to Configuring Transport Servers), and use the other local port to configure the ADN Connection (refer to Configuring ADN Connections). Both connections must be configured and assigned to the same slot.
After you finish configuring the Load Balancer and the applications, the following will occur: