In this section:

The following procedures are used to create, configure or delete Load Balancer targets.

Note

A maximum of 256 targets can be created for each Load Balancer.

To Create a Target 

  1. Login to the Web UI.
  2. Click Load Balancer.
  3. Do one of the following:
    1. If there is only one Load Balancer configured on system, proceed to step 4.
    2. If there are multiple Load Balancers configured on system, select the appropriate Load Balancer (LB_1 or LB_2).
  4. Click Targets.
  5. Click Create.
  6. Configure the required attributes.
  7. Click Create.

To Configure a Target 

  1. Login to the Web UI.
  2. Click Load Balancer.
  3. Do one of the following:
    1. If there is only one Load Balancer configured on system, proceed to step 4.
    2. If there are multiple Load Balancers configured on system, select the appropriate Load Balancer (LB_1 or LB_2).
  4. Click Targets.
  5. Select appropriate Target. 
  6. Configure the required attributes.
  7. Click Continue.

To Delete a Target

Note

Before deleting a target, remove all associated connections (refer to Delete a Connection).

  1. Login to the Web UI.
  2. Click Load Balancer.
  3. Do one of the following:
    1. If there is only one Load Balancer configured on system, proceed to step 4.
    2. If there are multiple Load Balancers configured on system, select the appropriate Load Balancer (LB_1 or LB_2).
  4. Click Targets.
  5. Select appropriate Target. 
  6. Click Delete.


  • No labels