Use the following information if you have to change any of the initially configured networking parameters.
Task | Procedure |
---|---|
Configure various aspects (for example, ethernet config, network information, management network) of the SP2000. | Configuring SP2000 Network Information |
Map a host name to an IP address. | Using the Hostname Resolution Feature |
Use a DNS configuration associated with a DNS value rather than an IP address for a node in your network. | Add DNS Configurations |
Confirm that the Ethernet interfaces are configured and responding correctly and that the system is accessible from the network | Confirm Successful Network Configuration |
Configure the IP routing (also referred to as status routes) table Note: The terms Static Route and IP Route can be used interchangeably in this library. | SP2000 Configuring the IP Routing Table Caution
If changes are made to the routing IP networking such that these changes affect the SS7 and/or Diameter stack, the appropriate changes would have to be made to the configuration in the affected applications (for example, M2PA links, M3UA servers, SP2000 nodes, and so on). |
Secure an Integrated Monitoring Feed (IMF) license. | If you are using a vSP2000, the Integrated Monitoring Feed (IMF) is licensed by default. |