Use the following information if you have to change any of the initially configured networking parameters.
| Task | Procedure |
|---|---|
| Configure various aspects of the DSC 8000 (for example, ethernet config, network information, management network). | |
| Map a host name to an IP address. | |
| Use a DNS configuration associated with a DNS value rather than an IP address for a node in your network. | |
| Confirm that the Ethernet interfaces are configured and responding correctly and that the system is accessible from the network | |
Configure the IP routing (also referred to as status routes) table Note: The terms Static Route and IP Route can be used interchangeably in this library. | Configuring the DSC 8000 IP Routing Table Caution
If changes are made to the routing IP networking such that these changes affect the SS7 and/or Diameter stack, the appropriate changes would have to be made to the configuration in the affected applications (for example, M2PA links, M3UA servers, and so on). |
Overview
Content Tools