In this section:
The following section is only applicable to the DSC 8000, the DSC SWe (on MA-RMS), the Signaling Platform 2000 (SP2000), and the virtual SP2000 (on MA-RMS).
Before you can proceed with any other provisioning, you must select the link combinations that you want to have on your system.
The following table provides the link capacity (link combination) options matrix for the AMC308:
¹ Although the Web UI shows that you can provision up to 128 Low-speed Links, for this release, the SP2000 only supports 126 Low-speed Links.
² Although the Web UI shows that you can provision up to 8 High-speed ATM Links, for this release, the SP2000 only supports 7 High-speed ATM Links.
The following table provides the link capacity (link combination) options matrix for the AMC348.
1 Although the Web UI shows that you can provision up 128 Low-speed Links, the DSC 8000 only supports 126 Low-speed Links.
2 Although the Web UI shows that you can provision up 8 High-speed ATM Links, the DSC 8000 only supports 7 High-speed ATM Links.
The following table provides the link capacity (link combination) options matrix for the PCE382.
1 Although the Web UI shows that you can provision up 128 Low-speed Links, the DSC SWe (on MA-RMS) only supports 124 Low-speed Links.
2 Although the Web UI shows that you can provision up 8 High-speed ATM Links, the DSC SWe (on MA-RMS) only supports 4 High-speed ATM Links.
Refer to the following sections for more information about the various supported link types:
The respective I/O card must be restarted to apply link combination or Protocol Variant changes (see To restart an I/O card).