Not supported by SBC SWe Lite.
Usage of the Easy Configuration wizard to configure the SBC Edge (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.
The SBC Easy Configuration interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC and Skype for Business/Lync. The SBC can be configured to connect a Microsoft UC environment with a PSTN Provider through ISDN.
These instructions assume the SBC Easy Configuration wizard is running. See Using the Easy Configuration Wizard.
Select the Application type (ISDN PTSN ↔ Microsoft UC). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
The scenario in which the configuration template is provided. In this case, select ISDN PSTN ↔ Microsoft UC.
Enter the name to describe ISDN PSTN ↔ Microsoft UC setup.
This value will be prefixed on all the SBC configuration elements created by the Setup Wizard pertaining to this deployment.
The country in which the ISDN PSTN ↔ Microsoft UC setup originates.
The E911 Elin number from the "CompanyName" field configured in Lync location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Lync Setup. For more information, see Creating and Modifying Entries to Transformation Tables.
Defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options: ELIN Identifier, E911/E112 or None.
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
Sets Provider Type to ISDN.
Defines the version of Microsoft UC. Valid options: Skype for Business, Lync 2010/2013 or Microsoft Cloud Connector Edition
Enter the scenario configuration details based on the endpoint selected. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
Specifies the physical T1/E1 port used for this Signaling Group. Valid option: T1 or E1.
The physical T1/E1 port number to which the PSTN line is physically connected. DS1 entries are configured with the following command buttons: Up (move a DS1 port up in the list), Down (move a DS1 port down in the list), Add (adds a DS1 port), and Remove (deletes a DS1 port).
For example, click Add. Select the desired PSTN port and OK.
Specifies the ISDN variant for the port type in the ISDN Signaling Group.
For T1
For E1:
Determines if the SBC should translate dialed PSTN digits as phone extensions. Valid options: Translation Extension (translates digits into phone extensions) or Passthrough Untranslated (does not translate digits).
The numbers to prefix for the translated phone extension. This field is available only when ISDN Number Translation is set to Translation Extension.
The number of digits used to account for the PSTN extension. Valid options: 2, 3, 4, or 5.This field is available only when ISDN Number Translation is set to Translation Extension.
The Pool name of the Skype for Business/Lync Server (FQDN).
The IP protocol to use for sending and receiving SIP messages between SBC and the Server Pool Host. Valid entry: TLS or TCP.
The Port Number used for sending and receiving SIP messages between SBC and the Server Pool Host.
This steps displays a summary of the configuration items from Step 1 and Step 2. Click Finish to submit (to cancel the configuration, click Cancel).
This example displays a ISDN PSTN ↔ Microsoft UC setup.