In this section:
This object specifies the name of the Internet Key Exchange (IKE) peer database entry. This name identifies an entry in the IKE Peer Database (IPD). The IPD is a list of remote devices that may become IPSec peers. The IPD establishes the authentication and other phase 1 criteria for the peer-to-peer negotiation to eventually reach an IKE Security Association (SA) between this specific peer and the SBC. On the SBC main screen, navigate to All > Address Context > IPsec > Peer. You can check the Peer for each Address Context or all the Address Contexts created. Use the drop-down box to select the desired Address Contexts. The Peer window is displayed. To edit any of the Peer in the list, click the radio button next to the specific Peer name. The Edit Selected Peer window is displayed. Make the required changes and click Save. To create a new Peer, click New Peer tab on the Peer List panel. The Create New Peer window is displayed. Example 1: When Auth Type = Psk Example 2: When Auth Type = Rsa Sig Peer Parameters: Parameter Description Name The name of the peer you are configuring. IP Address V4 or V6 The IPv4 or IPv6 address of the peer. Protocol The SPD traffic selector IP PROTOCOL. Valid values: Pre Shared Key Enter the pre-shared secret key to use with this peer. The SBC accepts the pre-shared key in the following formats: In either case the given value represents a "pre-shared secret" between the SBC and the IKE peer. This value is used for mutual authentication for phase 1 negotiation to set up an IKE Security association. Auth Type The authentication method for this peer. Local Certificate1 Choose an available remote certificate from the drop-down menu. Remote Certificate1 Choose an available remote certificate from the drop-down menu. Protection The name of the IKE protection profile to be applied to the Key management protocol exchange with this peer. The key management identity type. The local identity domain name. Up to 255 characters are allowed. 1 The fields Local Certificate and Remote Certificate only display when Auth Type = Rsa Sig. The IP Vx Addr attribute is not used at this time. If it is present, ignore it. To copy any of the created Peer and to make any minor changes, click the radio button next to the specific Peer to highlight the row. Click Copy Peer tab on the Peer List panel. The Copy Selected Peer window is displayed along with the field details which can be edited. Make the required changes to the required fields and click Save to save the changes. The copied Peer is displayed at the bottom of the original Peer in the Peer List panel. To delete any of the created Peer, click the radio button next to the specific Peer which you want to delete. Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision. Click Yes to remove the specific Peer from the list.To View Peer
To Edit Peer
To Create Peer
show
" commands.
ProfileLocal Identity – The local identity type that the SBC presents to the peer during phase 1 authentication. Type Domain Name To Copy Peer
To Delete Peer