You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

ASM Behavior on Sonus SBC 1000/2000 Reboot Operation

Depending on your Sonus SBC 1000/2000 model, users with a built-in Working with the ASM and SBA may be impacted by this operation:

  • Sonus SBC 2000
  • If the ASM is running, rebooting the Sonus SBC 1000/2000 will cause the ASM to also reboot.
  • If the ASM is shut down, rebooting the Sonus SBC 1000/2000 will not restart the ASM.
  • To bring the ASM back into operation, you must physically power off and power back on the Sonus SBC 1000/2000.
  • Sonus SBC 1000 --- rebooting the Sonus SBC 1000/2000 will not have an effect on the ASM.

Rebooting the Sonus SBC Edge

To reboot the Sonus SBC Edge system:

  1. In the WebUI, click the Tasks tab.

  2. In the left navigation pane, under the System, click Reboot Sonus SBC.

    Reboot

  3. Click OK.The following popup will be displayed to confirm the action:

    Confirm



  4. Click OK to reboot Sonus SBC Edge

  5. The web interface will dispatch the following status message throughout the reboot cycle.

    Status Message

 

 

On average, the Sonus SBC 1000/2000 system takes between 3 to 4 minutes to fully reboot and become reachable again through the web interface.

Upon completion, you will be automatically redirected to the  Login Screen

 

 

  • No labels