You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

The Link Monitor Configuration table is used to configure information for the following:

  • CAC/IPSEC. Link is monitored for CAC/IPSEC profile.
  • Backup Default Route. When the SBC 1000/2000 or SBC SWe Edge is configured to for Destination Resiliency (Backup Default Route), the Link Monitor checks for problems on the default route to the ISP. The SBC recognizes when the Internet destination is not reachable from a given (preferred) ISP; all subsequent calls are routed (via backup default route) to the secondary ISP to reach the intended Internet destination. For details on configuring a Backup Default Route, refer to Best Practice - Configure Destination Path Resiliency through Independent Internet Connections.
Note

CAC/IPSEC is only applicable to the SBC 1000/2000.

The Backup Default Route feature is applicable to the SBC 1000/2000 and SBC SWe Edge.

For SBC SWe Edge, Monitor Type is a read-only option and is always set to Backup Default Route.

Prerequisites

Applies only if the Monitor type is CAC/IPSEC.

The following items must be configured before a Link Monitor Configuration Table entry can be successfully created:

Working with Link Monitor Configuration Tables

  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Protocols > Network Monitoring > Link Monitors Configuration.


To view a Link Monitor Configuration Table entry's properties:

  1. Click the pop-up icon () next to the entry you want to view.
  2. When you are finished, close the window.

To delete an entry, select the checkbox next to the entry and then click the Delete () icon.


Additional topic:




  • No labels