The Link Monitor Configuration table is used to configure information for the following:

Backup Default Route. When the SBC 1000/2000 or SBC SWe Edge is configured to for Destination Resiliency (Backup Default Route), the Link Monitor checks for problems on the default route to the ISP. The SBC recognizes when the Internet destination is not reachable from a given (preferred) ISP; all subsequent calls are routed (via backup default route) to the secondary ISP to reach the intended Internet destination. For details on configuring a Backup Default Route, refer to Best Practice - Configure Destination Path Resiliency through Independent Internet Connections.

Note

The Backup Default Route feature is applicable to the SBC 1000/2000 and SBC SWe Edge.

For both SBC 1000/2000 and SBC SWe Edge, Monitor Type is a read-only option and is always set to Backup Default Route.

Working with Link Monitor Configuration Tables

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to Protocols > Network Monitoring > Link Monitors Configuration.


To view a Link Monitor Configuration Table entry's properties:

  1. Click the pop-up icon () next to the entry you want to view.
  2. When you are finished, close the window.

To delete an entry, select the checkbox next to the entry and then click the Delete () icon.


Additional topic: