You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Use this workflow for the initial setup of your new 

Unable to show "metadata-from": No such page "_space_variables"
device. This workflow applies to all Edge 8000 Series devices.


Note

This workflow references procedures within the

Unable to show "metadata-from": No such page "_space_variables"
document suite as well as procedures from other
Unable to show "metadata-from": No such page "_space_variables"
collections, such as the
Unable to show "metadata-from": No such page "_space_variables"
document suite and the RAMP document suite.


Prerequisites

  1. Login access to the
    Unable to show "metadata-from": No such page "_space_variables"
    command line interface (CLI), as user sysadm
  2. Login access to the
    Unable to show "metadata-from": No such page "_space_variables"
    web-based graphical user interface (GUI), as user admin
  3. Login access to the RAMP CLI, as users insight and admin


Workflow

StepActionUser Interface
1

Physically install the device.

This includes installing the device and its cabling, and powering on the system. Refer to Edge 8000 Series Hardware Installation.


2

Configure the initial platform settings.

Refer to Running Setup Wizard.

Unable to show "metadata-from": No such page "_space_variables"
CLI via serial console connection or ssh client, then the Edge 8000 Setup Wizard text user interface (TUI)

3

Generate and install the SBC SWe Edge license.1

(Optional for 8100; required for 8300.) Refer to Obtaining and Installing an SBC SWe Edge Production Node-Locked License.

Unable to show "metadata-from": No such page "_space_variables"
GUI via web browser

4

Configure the SBC SWe Edge software.

(Optional for 8100; required for 8300.) This configures the SWe Edge for a single end-point scenario. Refer to Running Easy Config.

Unable to show "metadata-from": No such page "_space_variables"
GUI via web browser

5

Perform additional provisioning.

Contact your Ribbon account representative for additional analog provisioning procedures.


6

Configure system security.

Contact your Ribbon account representative for system security configuration guidelines.


7

Configure dynamic RAMP registration.

Refer to Register an Edge 8000 Device.

RAMP CLI via ssh

Notes:

  1. The Edge 8000 device comes factory-installed with an on-premise, virtual machine (VM) version of

    Unable to show "metadata-from": No such page "_space_variables"
    . Follow the instructions in Obtaining and Installing an SBC SWe Edge Production Node-Locked License to order a production license for an on-premise VM license, then generate and install the license per the procedure given in that document.

  • No labels