You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

This object specifies the remote Identity that 

Unable to show "metadata-from": No such page "_space_variables"
asserts to the Peer during phase 1 authentication.

On SBC main screen, navigate to All > Address Context > Ipsec > Peer > Remote Identity.

The Remote Identity can be checked for each Address Context and Peer or all the Address Contexts and Peers. Use the drop-down boxes to select the desired Address Context and Peer.

Figure 1: All - Address Context - Ipsec - Peer - Remote Identity

The Remote Identity window is displayed.

The following fields are displayed:

Table 1: Local Identity Parameters

Parameter

 Description

fqdn <domainName>
This parameter specifies that the remote identity will be presented in Fully Qualified Domain Name (FQDN) format, taking as its value the FQDN of the
Unable to show "metadata-from": No such page "_space_variables"
, specified by the next argument such as westford.example.com.
ipV4Addr <ipAddress>
This parameter specifies that the remote identity will be presented in IPv4 address dotted decimal format, taking as its value the IP address of the 
Unable to show "metadata-from": No such page "_space_variables"
specified by the next argument (example: 128.127.50.224).
ipV6Addr <ipAddress>

This parameter specifies that the remote identity will be presented in IPv6 address hexadecimal/colon format, taking as its value the IP address of the 

Unable to show "metadata-from": No such page "_space_variables"
specified by the next argument (example: 1280:1276:3350:2224:2222:3333:8888:1245 or fd00:21:445:128::7880).

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.


  • No labels