In this section:
Overview
The Logging Enhancement feature is in preview for
In a high call volume deployment, the
- Ingress SG
- Remote IP
- Calling Party
- Called Party
The Call Criteria Table, available in the WebUI is used to store the call criteria configuration.
View the Call Criteria Table
The Call Criteria Table stores the call criteria data configuration; you add call criteria entries in which the
View the Call Criteria table as follows:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Logging Configuration > Diagnostic Logging > By Call Criteria.
Create an Entry in the Call Criteria Table
Create an entry in the Call Criteria table as follows:
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Logging Configuration > Diagnostic Logging > By Call Criteria.
Click the Create (
) icon. The Create Call Trace Criteria window is displayed.Configure the fields. See below for field definitions.
Modify an Entry in a Call Criteria Table
- Click the expand ( ) Icon next to the entry you wish to modify.
- Edit the entry properties as required, see field definitions above.
Enable all Entries in a Call Criteria Table
- Select the check box next to the entry you wish to enable.
- Click the Enable ( ) icon at the top of the table.
Disable an Entry in a Call Criteria Table
- Select the check box next to the entry you wish to disable.
- Click the Disable ( ) icon at the top of the table.
Delete an Entry in a Call Criteria Table
- Select the check box next to the entry you wish to disable.
- Click the Delete (X) icon at the top of the table.
Perform Call Trace Logging - Configuration Example
Follow the configuration example below for logging based on calls details being traced on the Ingress Signaling group (Ingress SG).
- In the WebUI, click the Settings tab.
In the left navigation pane, go to Logging Configuration > Diagnostic Logging > By Call Criteria.
- Add an entry to the Call Criteria Table and set the Rule Type to Ingress SG.
- Run multiple calls. Calls should be dispersed between the different Signaling Groups. For details on Signaling Groups, refer to Managing Signaling Groups.
- Access the webui.log ( Diagnostics > Logs > Local System Logs tab). The log displays the log lines associated with the calls using the Ingress SG. For details on the log display, refer to Managing Local Logs.
For achieve the best result log results based on call criteria:
- Remove all subsystems from the Logging configuration.
- Set the local log level to Error.