Working with Logging

Overview

The SBC Edge Portfolio logging service allows you to troubleshoot issues such as call signaling, call quality and performance by collecting activity logs from its subsystems. These logging records can then be analyzed to diagnose problems and optimize the performance of SBC Edge Portfolio for your environment.

The SBC Edge Portfolio system supports the following methods for recording logs:

• Remote Syslog configuration, uses a syslog server to store a larger amount of log activity for extended period of time. Using a Remote Logging configuration is the recommended logging method since it allows for a greater logging history and level of detail. You must use this method of logging when working with Ribbon Technical Support (TAC).

• Local Log configuration (available only on the SBC 2000, Ribbon SBC 1000 v2 equipped with eUSB, and SBC SWe Edge), stores temporary log files directly on the system. Each local log file retains a limited amount of recorded log messages. Local logging is only useful for quick, high level, troubleshooting, and is not recommended (nor suited) for extended troubleshooting sessions.

  Logging at Debug or Trace Level

  • Increasing the local log level of any subsystem to Debug or Trace levels should be performed only if requested by Ribbon Technical Support (TAC).
  • After completing the collection of logs from the tests, all subsystems with custom log level must be reset to the Default local log level (Warning) or deleted.
  • Avoid performing this action on a production system.

A fully running SBC Edge Portfolio system can generate a large amount of logging information. For this reason, the SBC Edge Portfolio logging service allows you to customize the types of logging messages (and level of detail) you wish to be recorded by Managing Subsystems Logging and Log Profiles.

Debug SBC Edge Portfolio Logs using LX

Refer to 

Debug Easy Configuration Errors

This section includes how to capture logs for debugging Easy Configuration errors as follows:

1. In the WebUI, click the Diagnostics tab.

2. In the Logs page, click the Logs >  Web Error Logs.

3. View the lighttpd.error.log file. 

   If  Easy Configuration encounters an error condition, the system will roll back the changes made up to that point. To help with troubleshooting, you can view where the roll back began in the lighttpd.error.log file.

   Logging for Easy Configuration

   For details on Easy Configuration, refer to Working with SBC Easy Configuration.

Related Topics: