You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
Overview
The Unable to show "metadata-from": No such page "_space_variables"
can be deployed running as a VNF on a uCPE platform running an Intel Atom processor with 2.5 GHz or more. All of the features and functionalities of the Unable to show "metadata-from": No such page "_space_variables"
are supported in this deployment type for 1, 2, or 4 vCPUs. ThUnable to show "metadata-from": No such page "_space_variables"
can be deployed on Service Providers uCPEs, such as Versa.
The following are the server and Unable to show "metadata-from": No such page "_space_variables"
requirements for running the Unable to show "metadata-from": No such page "_space_variables"
on a uCPE platform.
Server Hardware Requirements
Hardware and Software Requirements
Configuration | Requirement |
---|
Processor | Intel Atom |
CPU | 2.5 GHz or more |
RAM | Each Unable to show "metadata-from": No such page "_space_variables" instance requires 1, 2, or 4 GiB of RAM depending on the configuration |
Datastore | Hard disk requirements are dependent upon the number of VNFs hosted, the size of each VNF at full size, and whether snapshots will be enabled |
Unable to show "metadata-from": No such page "_space_variables"
RequirementsGeneral Recommendations
- Plan enough resources (RAM, CPU, NIC ports, hard disk, etc.) for all the VNFs to run on the server platform, including resources needed by the uCPE itself.
- Allocate each VNF with only as much virtual hardware as that VNF requires. Provisioning a VNF with more resources than it requires can, in some cases, reduce the performance of that VNF as well as other virtual machines sharing the same host.
Disconnect or disable any physical hardware devices that you will not be using (floppy drives, network interfaces, storage controllers, optical drives, USB controllers, etc.) under BIOS settings to free up interrupt/CPU resources.
SBC SWe Edge Requirements
Setting | Minimum |
---|
vCPU | 1, 2, and 4 supported. |
RAM | 1 GB to support 1 vCPU 2 GB to support 2 vCPU 4 GiB to support 4 vCPU |
vNIC | 3 Management Port, LAN Port, WAN Port. Note: One vNIC is mandatory for management. |
Virtual Hard Disk | 5 GiB |
Install Unable to show "metadata-from": No such page "_space_variables"
as a VNF on a uCPE
Refer to the specific uCPE's documentation for installation instructions; the uCPE's vendor specific guidelines must be followed for Unable to show "metadata-from": No such page "_space_variables"
VNF deployments.
For initial setup of the Unable to show "metadata-from": No such page "_space_variables"
, refer to Running Initial Setup on SBC SWe Edge.
If you are installing an Unable to show "metadata-from": No such page "_space_variables"
instance to carry live enterprise traffic, proceed to Obtaining and Installing an SBC SWe Edge Production License.