EdgeMarc 7400 Back Panel
EdgeMarc 7400 Back Panel Components
| Physical Label/Type | Function | Description | |
|---|---|---|---|
| 1 | Port 1 | LAN 1 | 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default IP: 192.168.1.1 |
| 2 | Port 2 | WAN 1 | 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or Internet network connectivity. Default IP: None |
| 3 | Port 3 | Mgmt | 10/100/1000 Mbps RJ-45 Ethernet port for optional management network connectivity. This interface must not be on the same network as the WAN or LAN subnets. This network cannot be within a subnet contained in a “Route” statement. |
| 4 | Port 4 | WAN 2 | Secondary WAN Interface Port. 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or Internet network connectivity. The port is covered with a removable RJ-45 cap. Remove the cap before use. Supports basic routing in addition to the following: • Dual WAN Port feature—Two discrete WAN interfaces with the ability to independently route • WAN failover / WAN Link Redundancy (WLR) • Link aggregation for WAN acceleration Note: This port is unused if you are running a software release prior to 13.11.2. |
| 5 | Port 5 | LAN 2 | 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default IP: 192.168.1.1. The port is covered with a removable RJ-45 cap. Remove the cap before use. Note: This port is unused if you are running a software release prior to 13.12. |
| 6 | Port 6 | LAN 3 | 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default IP: 192.168.1.1. The port is covered with a removable RJ-45 cap. Remove the cap before use. Note: This port is unused if you are running a software release prior to 13.12. |
| 7 | Erase | Erase button | Press the Erase button in quick succession to control the following: One click—No action. Two clicks—Resets the CLI and GUI password with no service interruption. Three clicks—Restores to factory default settings and reboots the system. Note: When restored to factory default settings, the current configuration is lost, disconnecting all VoIP devices, Internet connectivity, and network access for computers until the system is reconfigured. |
| 8 | On/Off Switch | System power switch | Powers the system on and off. |
| 9 | VGA Port | Unused | Reserved for future use. |
| 10 | RJ-45 Port | Serial Craft Console Port | RJ-45 serial craft console port for management. Baud: 9600 Data: 8 Parity: N Stop: 1 Flow Control: NONE An RJ-45 to DB9 console cable is included in the box with the Unable to show "metadata-from": No such page "_space_variables" . |
| 11 | Power socket LED | Power Status LED | Indicates the online/offline status for the power supply module. When the power supply module is online, the LED is green. |
| 12 | Power socket LED | Power Status LED | Indicates the online/offline status for the power supply module. When the power supply module is online, the LED is green. |
| 13 | Alarm Release Button | Red alarm button | This is an audible alarm that alerts you when one of the power supply modules has gone offline. Press the button to silence the alarm. |
| 14 | AC Power Socket (1) | Input power | Provides power to power supply module 1. Accepts a 3-pin shroud female plug. |
| 15 | Power supply module (1) | Power supply unit | Redundant power supply unit capable of powering the Unable to show "metadata-from": No such page "_space_variables" . |
| 16 | AC Power Socket (2) | Input power | Provides power to power supply module 1. Accepts a 3-pin shroud female plug. |
| 17 | Power supply module (2) | Power supply unit | Redundant power supply unit capable of powering the Unable to show "metadata-from": No such page "_space_variables" . |
| 18 | USB Ports | Unused | Reserved for future use. |
Overview
Content Tools