In this section:
Accounting File Version Change
The CAM version of
For more information, refer to the section Billing Introduction.
CAM Field Changes
New Accounting Record Fields in Release 09.02.00
Refer to the following pages for details:
New Call Accounting CDR fields are added in support of feature SBX-92556 which introduced beep tones for recorded calls.
Field nameASCII Accounting Max
ASCII
Length
TypeRecord Number
START
STOP
ATTEMPT
INTERMEDIATE
Beep Tone Inserted 1 Decimal NA 289 NA NA Direction of Beep Tone 1 Decimal NA 290 NA NA
New CDR fields are added in support of feature SBX-92556 CDR records in local time zone format.
Field nameASCII Accounting Max
ASCII
Length
TypeRecord Number
START
STOP
ATTEMPT
INTERMEDIATE
Start Time (Local) 21 Characters 190 291 208
182 Disconnect Time (Local) 21 Characters NA 292 209 NA Intermediate Time (Local) 21 Characters NA NA NA 183 Call Established Time (Local) 21 Characters 191 293 210 184 New EVENT and RECORDING records are added in support of feature SBX-92556 CDR records in local time zone format.
New EVENT record:Field Name
Field Number
Description
SIP Request Start Time (Local) 37 Max length 21
Date/time format: mm/dd/yyyy hh:mm:ss.d
New RECORDING records:
Field
Length
Type
Record number
Comment
Start Time (Local) 21 Characters 29 mm/dd/yyyy hh:mm:ss.d Local date and time stamp when Setup Request was sent. Disconnect Time (Local) 21 Characters 30 mm/dd/yyyy hh:mm:ss.d Local date and time stamp when Disconnect Request was received. New system-level CDR fields are added in support of feature SBX-92556 to support CDR records in local time zone format.
Field Name
Max Length in
ASCII CharactersType
REBOOT SWITCHOVER SW_CHANGE Record Number Boot Time (Local) 21 Characters 8 8 Record Time (Local) 21 Characters 9
- The maximum length of the following fields changed to the values indicated below:
- Ingress Protocol Variant Specific Data: 4794
- Egress Protocol Variant Specific Data: 4794
- The following CDR field are added to log the attestation level in START & STOP records for all STIR services as part of feature SBX-92556. Possible values are A, B or C.
- The Ingress Protocol Variant Specific Data is updated with data based on ingress signaling.
- The Egress Protocol Variant Specific Data is updated with data received from the PSX, if available.
If PSX data is not available, received Ingress signaling data is populated in the Egress PVSD.
Field name
ASCII Accounting Max
ASCII
Length
TypeRecord Number
START
STOP
ATTEMPT
INTERMEDIATE
Ingress PVSD Attestation-Indicator
1
Characters 42.83
52.83
45.83
38.83
Egress PVSD Attestation-Indicator
1
Characters 55.83
69.83
59.83
51.83
The following SIP Variant sub-fields are added as part of SBX-101975 STIR RPH feature:
STI RPH Service Type (Field 84)
STI RPH Service Status (Field 85)
STI RPH Reason Code (Field 86)
New Accounting Record Fields in Release 09.01.00
The following changes are captured in the 09.01.00 Release.
SIP Variant Sub-Field
In START and STOP records:
- The SIP variant sub-field 82 under Ingress Protocol Variant Specific Data is populated with the value "nchg" when call processing leads the SBC including a "no-charge notification" (
P-K-Info:nchg
header) in 18x responses. Otherwise, it is empty. For more information, refer to SIP Variant Sub-field Descriptions and Sending a No-Charge Notification to the Ingress Call Leg.