In this section:
New CLI in 9.0.0R0
Info
Default values are enclosed in square brackets [ ].
SBX-73090 Performance Registration Statistics per Domain
The SBC now collects interval-based SIP registration statistics per domain. This allows you to retrieve statistics for the current interval or a series of intervals using the SBC CLI.
CLI Syntax
The following is the syntax for retrieving per-domain SIP registration statistics for the current statistics interval.
> show status|table addressContext <addressContext_Name> sipRegCountDomainCurStats <DomainName>
The following is the syntax for retrieving per-domain SIP registration interval statistics.
> show status|table addressContext <addressContext_Name> sipRegCountDomainIntStats <DomainName>
Command Parameters
The following statistic fields appear in the output.
SIP Current and Interval Registration Statistics per Domain
| Output Field | Description |
|---|---|
number | For interval statistics, a sequence number which identifies the interval to which the set of statistics apply. |
domainName | The name of the domain to which the statistics apply. The domain name can be an IP address or FQDN. |
intervalValid | For interval statistics, a value of "true" indicates that the the interval to which the set of statistics apply is valid. |
time | For interval statistics, the system uptime when the interval was collected. |
countAttempts | The number of SIP registration attempts on the SBC for the registration domain during the interval. |
countCumCompletions | The number of completed SIP registration attempts for the registration domain during the interval. |
countPending | The number of pending SIP registrations for the registration domain during the interval. |
countStable | The number of stable SIP registrations for the registration domain during the interval. |
countTotal | The total number of SIP registrations for the registration domain during the interval. |
emergencyAcceptTot | The total number of accepted emergency SIP registrations for the registration domain during the interval. |
emergencyActiveTot | The total number of active emergency SIP registrations for the registration domain during the interval. |
SBX-88296 ANI-DNIS Loop Detection
An ANI-DNIS loop refers to a situation when more than one call request shares the same combination of ANI (Automatic Number Identification) and DNIS (Dialed Number Identification Service) values. This feature adds a new aniDnisZoneloopDetection object to zones. This object has a state parameter to control whether ANI-DNIS loop detection is enabled and a parameter that defines the limit for loop instances per ANI-DNIS pair.
Command Syntax
% set addressContext <addressContext name> zone <zone name> aniDnisZoneloopDetection
aniDnisZoneLoopInstances <1..1250>
aniDnisZoneState <disabled | enabled>
Command Parameters
| Parameter | Default | Description |
|---|---|---|
| 1 | Use this parameter to specify an integer limit on call requests containing matching ANI-DNIS pairs. When the limit is reached, the SBC rejects any subsequent call requests for the same ANI-DNIS combination. The valid range is 1 to 1250. |
| disabled | Use this parameter to enable or disable ANI-DNIS loop detection for the specified zone.
|
Refer to Zone - ANI-DNIS Loop Detection - CLI for more information.
SBX-91618 Using an OOD REFER to Terminate an Active Call
This feature adds a new signaling parameter for SIP trunk groups that controls whether the SBC locally handles OOD REFER requests.
Command Syntax
% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <trunkGroup name> signaling localOODReferSupport <disabled | enabled>
Command Parameters
| Parameter | Description |
|---|---|
| Enable this flag to have the SBC locally handle out-of-dialog (OOD) REFER requests.
|
Refer to SIP TG - Signaling - Local OOD REFER Support - CLI for more information.
SBX-93310 Enhance the processing of Contact headers in REGISTER messages
This feature adds a new configuration object, the Register Contact Profile, and a new zone option to assign a profile to a zone.
Command Syntax - Profile
% set profiles signaling registerContactProfile <profile name>
contactIncludeVariables <hostpart | userpart>
Command Parameters - Profile
| Parameter | Description |
|---|---|
registerContactProfile<profile name> | Specifies a name for the Register Contact Profile of up to 23 characters. |
| Specifies the element or elements within the Contact header to use as additional keys when creating or retrieving RCBs. The options are:
If specifying more than one value, separate the values with a comma, such as: |
Command Syntax - Zone
% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>
Command Parameter - Zone
| Parameter | Description |
|---|---|
| Specifies the name of a Register Contact Profile to assign to a zone. The SBC uses the Contact header elements specified in the profile as additional keys when it creates or retrieves RCBs. |
For more information refer to Creating Multiple User Registrations Based on Contact Headers in REGISTER Messages.
Overview
Content Tools