Modifies OSPF configuration on the Sonus SBC 1000/2000 system. Network prefix in format A.B.C.D/M obtained from Logical interface should be provided for configuring OSPF protocol. If multiple network addresses needs to be configured then the network addresses should be comma separated.
https://134.56.227.163/rest/ospfconfig/{identifier}
POST
true
Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
---|---|---|---|---|---|---|
OSPFInstance | Yes | Yes | string | none | 16 - Max Length | Specifies OSPF Protocol instance name. OSPF Instance name should not be modified once it is created. |
OSPFProcessID | Yes | Yes | int | 1 | Possible values:
| Specifies the process ID of the OSPF protocol instance. The process ID is local to the router. Process ID cannot be modified once OSPF instance is created. Process ID should be in the range 1-65535 |
OSPFRouterID | Yes | Yes | string | none | 15 - Max Length | Specifies OSPF Router ID in IPv4 address format (A.B.C.D). Router ID should not be modified once OSPF instance is created |
enableDefaultInfoOriginate | Yes | Yes | Enum | 0 | Possible values:
| Specifies whether Default Information Originate feature is to be enabled or disabled. |
OSPFAreaID | Yes | Yes | string | none | 16 - Max Length | Specifies OSPF Area ID (A.B.C.D | 0-4294967295). Should be specified in IPv4 address format (A.B.C.D) or as a decimal value in the range (0-4294967295). Area ID cannot be modified once OSPF instance is created |
OSPFAreaType | Yes | Yes | Enum | 0 | Possible values:
| Specifies OSPF area to create. OSPF Area type cannot be modified once OSPF instance is created |
ifName | Yes | Yes | string | none | 500 - Max Length | Specifies network address and mask (A.B.C.D/M) of logical interface. If multiple network addresses needs to be configured then the network addresses should be comma separated |
The POST can contain either only the attributes that are being updated, or the full set of attributes for the resource
Put code example here
Put Code response here