The OSPF Config allows the user to configure OSPF protocol on selected network address
REST API Methods for this Resource
Resource Schema
Configuration
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| ConfigIEState | No | Yes | Enum | 1 | Possible values:
| Specifies the Administrative State of the resource. |
| OSPFInstance | Yes | Yes | string | none | 16 - Max Length | Specifies OSPF Protocol instance name. OSPF Instance name should not be modified once it is created. |
| OSPFProcessID | Yes | Yes | int | 1 | Possible values:
| Specifies the process ID of the OSPF protocol instance. The process ID is local to the router. Process ID cannot be modified once OSPF instance is created. Process ID should be in the range 1-65535 |
| OSPFRouterID | Yes | Yes | string | none | 15 - Max Length | Specifies OSPF Router ID in IPv4 address format (A.B.C.D). Router ID should not be modified once OSPF instance is created |
| enableDefaultInfoOriginate | Yes | Yes | Enum | 0 | Possible values:
| Specifies whether Default Information Originate feature is to be enabled or disabled. |
| OSPFAreaID | Yes | Yes | string | none | 16 - Max Length | Specifies OSPF Area ID (A.B.C.D | 0-4294967295). Should be specified in IPv4 address format (A.B.C.D) or as a decimal value in the range (0-4294967295). Area ID cannot be modified once OSPF instance is created |
| OSPFAreaType | Yes | Yes | Enum | 0 | Possible values:
| Specifies OSPF area to create. OSPF Area type cannot be modified once OSPF instance is created |
| ifName | Yes | Yes | string | none | 500 - Max Length | Specifies network address and mask (A.B.C.D/M) of logical interface. If multiple network addresses needs to be configured then the network addresses should be comma separated |
Overview
Content Tools