You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

About this Resource

Availability: Since 2.1.0

Defines a remote BRI Port resource on the Sonus SBC 1000/2000 system.

REST API Methods for this Resource

Resource Schema

Configuration

Parameter Name Required Service Affecting Data Type Default Value Possible Values Description
ConfigIEStateNoYesEnum1Possible values:
  • 0 - esDISABLED
  • 1 - esENABLED
Specifies the Administrative State of the resource.
PortNameYesNostringnone128 - Max Length Specifies the string name of the Port.
PortAliasNoNostringnone20 - Max Length Specifies an alias name for the port for easy identification.
PortDescriptionNoNostringnone64 - Max Length Specifies a description for easy identification when being selected in Signaling Groups
PortTerminationYesYesEnum1Possible values:
  • 0 - btFalse
  • 1 - btTrue
 Controls the termination of the port. An S/T bus needs to be terminated at both ends. One end would be the NT device, and the other end would be the last TE device on the bus. When the Sonus SBC 1000/2000 system is software configured as an NT (connecting to a PBX), termination should always be Enabled (default). For NT/Network side from the ISDN Signaling Group only Enabled is valid. When the Sonus SBC 1000/2000 is software configured as a TE device (connecting to an NT1), termination is Enabled (default) when making a point-to-point connection between the TE port and the NT1. If other TE devices are sharing the bus of the Sonus SBC system going to the NT1, termination on the TE port should be Disabled.

Runtime

Parameter Name Possible Values Description
rt_PortOperatorStatusPossible values:
  • 0 - psUp
  • 1 - psDown
 Indicates operational status of the port.
rt_PortAlarmStatusPossible values:
  • 0 - pasNormal
  • 1 - pasYellow
  • 2 - pasBlue
  • 3 - pasRedLOS
  • 4 - pasRedLOF
  • 5 - pasRelayPassThrough
Displays the alarm status of this port.
rt_PortAssertAlarmTypePossible values:
  • 0 - apatYellow
  • 1 - apatRed
  • 2 - apatNormal
Displays the assert alarm type of this port.
rt_PortLoopbackTypePossible values:
  • 0 - pltLocal
  • 1 - pltRemote
  • 2 - pltLine
  • 3 - pltPayload
  • 4 - pltNone
Displays the loop back status of the port.
rt_PortTimeatLastOperStatusChange Indicates the last time (in epoch) when the operational status of the port changed.
rt_PortPhysicalLayerStatePossible values:
  • 0 - pplsNone
  • 1 - pplsInactiveF1
  • 2 - pplsSensingF2
  • 3 - pplsDeactivatedF3
  • 4 - pplsAwaitingSignalF4
  • 5 - pplsIdentifyingInputF5
  • 6 - pplsSynchronizedF6
  • 7 - pplsActivatedF7
  • 8 - pplsLostFramingF8
  • 9 - pplsDeactivatedG1
  • 10 - pplsPendingActivationG2
  • 11 - pplsActivatedG3
  • 12 - pplsPendingDeactivationG4
Indicates the physical states that are applicable to TE configured BRI port as F1-F8. The Normal state for TE port is represented as "F7 Activated". It also indicates the physical states that are applicable to NT configured BRI port as G1-G4. The Normal state for NT port is represented as "G3 Activated". Default is set to "None" when the BRI port is not applied to any ISDN Signaling Groups.

Statistics

Parameter Name Possible Values Description
rt_PortSignalingTypePossible values:
  • 0 - pstISDN
  • 1 - pstCAS
Displays the signaling type of the port.
rt_PortDataValidPossible values:
  • 0 - prtDataNotValid
  • 1 - prtDS1DataValid
  • 2 - prtHDLCDataValid
  • 3 - prtDS1andHDLCDataValid
  • 4 - prtAllDataValid
 Indicates which of the returned counters indicate valid data.
rt_PortFrameErrorsDisplays the number of Frame Errors detected on this port.
rt_PortCurrentSeverelyErroredFramingsecondsDisplays the number of Severely Errored Seconds in framing detected on this port.
rt_PortCurrentContolledRxSlipPositivesDisplays the number of Controlled Receive Slip Positives Errors detected on this port.
rt_PortCurrentContolledRxSlipNegativesDisplays the number of Controlled Receive Slip Negatives Errors detected on this port.
rt_PortCurrentContolledTxSlipPositivesDisplays the number of Controlled Transmit Slip Positives Errors detected on this port.
rt_PortCurrentContolledTxSlipNegativesDisplays the number of Controlled Transmit Slip Negatives Errors detected on this port.
rt_PortCurrentLineErroredSecondsDisplays the number of Errored Seconds in the line detected on this port.
rt_PortCurrentPathCodeViolationsDisplays the number of Path Code Violations detected on this port.
rt_PortCurrentLineCodeViolationsDisplays the number of Line Code Violations detected on this port.
rt_PortExcessiveZeroesDisplays the number of Excessive Zeroes detected on this port.
rt_PortBipolarviolations Displays the number of Bipolar Violations detected on this port.
rt_PortBurstyErrorSecondsDisplays the number of Bursty Errored Seconds detected on this port.
rt_PortNormalErrorSecondsDisplays the number of Normal Errored Seconds detected on this port.
rt_PortUnavailableSecondsDisplays the number of Unavailable Seconds detected on this port.
rt_PortRxBusy Displays the number of Receive Busy Errors detected on this port.
rt_PortTxNoValidData Displays the number of Transmit No Valid Data Errors detected on this port.
rt_PortRxFramesDisplays the number of received frames on this port.
rt_PortRxBytesDisplays the number of received bytes on this port.
rt_PortRxAbortsDisplays the number of Receive Aborts Errors detected on this port.
rt_PortRxNonOctetsDisplays the number of Receive Non-Octets Errors detected on this port.
rt_PortRxCRCErrorsDisplays the number of Receive CRC Errors detected on this port.
rt_PortRxOverrunsDisplays the number of Receive Overruns Errors detected on this port.
rt_PortRxHwErrorsDisplays the number of Receive Hardware Errors detected on this port.
rt_PortRxBadAddressDisplays the number of Receive Bad Address Errors detected on this port.
rt_PortRxCDLostDisplays the number of Receive CD Lost Errors detected on this port.
rt_PortRxNoBufferDisplays the number of Receive No Buffer Errors detected on this port.
rt_PortRxInternalTableOverflow Displays the number of Receive Internal Table Overflow Errors detected on this port.
rt_PortRxMaxBacklog Displays the number of Receive Max Backlog Errors detected on this port..
rt_PortTxFramesDisplays the number of transmitted frames on this port.
rt_PortTxBytesDisplays the number of transmitted bytes on this port.
rt_PortTxUnderrunsDisplays the number of transmitted underruns on this port.
rt_PortTxCollisionsDisplays the number of transmitted collisions on this port.
rt_PortTxInvalidDataDisplays the number of Transmit Invalid Data Errors detected on this port.
rt_PortTxInternalTableOverflow Displays the number of Transmit Internal Table Overflow Errors detected on this port.
rt_PortTxMaxBacklog Displays the number of Transmit Max Backlog Errors detected on this port.
rt_PortRxCountDisplays the number of recieved frames on this port.
rt_PortRxICountDisplays the number of received I (information) frames on this port.
rt_PortRxSCount Displays the number of received S (supervisor) frames on this port.
rt_PortRxUNCountDisplays the number of received UN (unnumbered) frames on this port.
rt_PortRxUADisplays the number of received UA (unnumbered ack) messages on this port.
rt_PortRxSABMEDisplays the number of received SABME (Set Asynchronous Balanced Mode Extended) messages on this port.
rt_PortRxDISCDisplays the number of received DISC (disconnect) messages on this port.
rt_PortRxDMDisplays the number of received DM (disconnected mode) messages on this port.
rt_PortRxFRMRDisplays the number of received FRMR (frame reject) messages on this port.
rt_PortRxRR Displays the number of received RR (receive ready) messages on this port.
rt_PortRxRNRDisplays the number of received RNR (receive not ready) messages on this port.
rt_PortRxREJDisplays the number of recieved REJ (reject) messages on this port.
rt_PortRxEstReqDisplays the number of times this port was in established request state.
rt_PortRxRelReqDisplays the number of times this port was in release request state.
rt_PortRxDataReqDisplays the number of times this port was in data request state.
rt_PortTxCountDisplays the number of transmitted frames on this port.
rt_PortTxCountBusy Displays the number of transmitted busy frames on this port.
rt_PortTxUADisplays the number of transmitted UA (unnumbered ack) messages on this port.
rt_PortTxSABMEDisplays the number of transmitted SABME (Set Asynchronous Balanced Mode Extended) messages on this port.
rt_PortTxDISCDisplays the number of transmitted DISC (disconnect) messages on this port.
rt_PortTxDMDisplays the number of transmitted DM (disconnected mode) messages on this port.
rt_PortTxFRMRDisplays the number of transmitted FRMR (frame reject) messages on this port.
rt_PortTxRR Displays the number of transmitted RR (receive ready) messages on this port.
rt_PortTxRNRDisplays the number of transmitted RNR (receive not ready) messages on this port.
rt_PortTxREJDisplays the number of transmitted REJ (reject) messages on this port.
rt_PortTxICountDisplays the number of transmitted I (information) messages on this port.
rt_PortLinkDownCountDisplays the number of link DOWNs on this port.
rt_PortLinkUpCountDisplays the number of link UPs on this port.
rt_PortLineStatusChangeTrapEnableDisplays whether the trap for status change is enabled on this port.
rt_PortSeverelyErroredSecondsDisplays the number of severely errored seconds on this port.
rt_PortDegradedMinutesDisplays the number of degraded minutes on this port.
rt_PortControlledSlipSecondsDisplays the number of seconds containing one or more controlled slips on this port.
rt_PortCurrentActiveCallsDisplays the number of active calls currently on this port.
rt_PortTotalCallsProcessedDisplays the total number of calls on this port.
rt_PortTotalErroredCallsDisplays the total number of errored calls on this port.
rt_PortTotalRefusedCallsDisplays the total number of refused calls on this port.
rt_PortTotalConnectedCallsDisplays the total number of calls connected on this port.
rt_PortTotalBlockedCallsDisplays the total number of blocked calls on this port.
rt_PortIncomingCallattemptsDisplays the number of incoming calls attempted on this port.
rt_PortIncomingCallacceptsDisplays the number of incoming calls that were accepted on this port.
rt_PortIncomingCallrejectsDisplays the number of incoming calls that were rejected on this port.
rt_PortIncomingCallcompletesDisplays the number of incoming calls that were completed on this port.
rt_PortIncomingBlockedCallsDisplays the number of incoming calls that were blocked on this port.
rt_PortIncomingCurrentCallsDisplays the number of current incoming calls on this port.
rt_PortOutgoingCallattemptsDisplays the number of outgoing calls attempted on this port.
rt_PortOutgoingCallacceptsDisplays the number of outgoing calls accepted on this port.
rt_PortOutgoingCallrejectsDisplays the number of outgoing calls rejected on this port.
rt_PortOutgoingCallcompletesDisplays the number of outgoing calls completed on this port.
rt_PortOutgoingBlockedCallsDisplays the number of outgoing calls blocked on this port.
rt_PortOutgoingCurrentCallsDisplays the number of current outgoing calls on this port.
rt_PortCountersLastResetTimeDisplays the last reset time of the counters on this port.
rt_PortCountersPullTimeDisplays the time(in epoch-seconds)at which the counters pull happened on this port.
rt_BusyHourCallAttemptsDisplays the BHCA rate for this port.
rt_BusyHourCallCompletionsDisplays the BHCC rate for this port.
  • No labels