Defines a remote BRI Port resource on the SBC.
REST API Methods for this Resource
- GET bricard id - telcobriport
- GET bricard id - telcobriport id
- POST bricard id - telcobriport id
- DELETE bricard id - telcobriport id
- POST telcobriport - action resetcounters
Resource Schema
Configuration
| Parameter Name | Required | Service Affecting | Data Type | Default Value | Possible Values | Description |
|---|---|---|---|---|---|---|
| ConfigIEState | No | Yes | Enum | 1 | Possible values:
| Specifies the Administrative State of the resource. |
| PortName | Yes | No | string | none | 128 - Max Length | Specifies the string name of the Port. |
| PortAlias | No | No | string | none | 20 - Max Length | Specifies an alias name for the port for easy identification. |
| PortDescription | No | No | string | none | 64 - Max Length | Specifies a description for easy identification when being selected in Signaling Groups |
| PortTermination | Yes | Yes | Enum | 1 | Possible values:
| Controls the termination of the port. An S/T bus needs to be terminated at both ends. One end would be the NT device, and the other end would be the last TE device on the bus. When the SBC is software configured as an NT (connecting to a PBX), termination should always be Enabled (default). For NT/Network side from the ISDN Signaling Group only Enabled is valid. When the SBC is software configured as a TE device (connecting to an NT1), termination is Enabled (default) when making a point-to-point connection between the TE port and the NT1. If other TE devices are sharing the bus of the SBC system going to the NT1, termination on the TE port should be Disabled. |
Runtime
| Parameter Name | Description | Data Type | Possible Values |
|---|---|---|---|
| rt_PortOperatorStatus | Indicates operational status of the port. | Enum | Possible values:
|
| rt_PortAlarmStatus | Displays the alarm status of this port. | Enum | Possible values:
|
| rt_PortAssertAlarmType | Displays the assert alarm type of this port. | Enum | Possible values:
|
| rt_PortLoopbackType | Displays the loop back status of the port. | Enum | Possible values:
|
| rt_PortTimeatLastOperStatusChange | Indicates the last time (in epoch) when the operational status of the port changed. | int | |
| rt_PortPhysicalLayerState | Indicates the physical states that are applicable to TE configured BRI port as F1-F8. The typical operating state for TE port is represented as "F7 Activated". It also indicates the physical states that are applicable to NT configured BRI port as G1-G4. The typical operating state for NT port is represented as "G3 Activated". Default is set to "None" when the BRI port is not applied to any ISDN Signaling Groups. | Enum | Possible values:
|
| rt_PortLicenseStatus | Indicates the license status of a port. | Enum | Possible values:
|
Statistics
| Parameter Name | Description | Data Type | Possible Values |
|---|---|---|---|
| rt_PortSignalingType | Displays the signaling type of the port. | Enum | Possible values:
|
| rt_PortDataValid | Indicates which of the returned counters indicate valid data. | Enum | Possible values:
|
| rt_PortFrameErrors | Displays the number of Frame Errors detected on this port. | long | |
| rt_PortCurrentSeverelyErroredFramingseconds | Displays the number of Severely Errored Seconds in framing detected on this port. | long | |
| rt_PortCurrentContolledRxSlipPositives | Displays the number of Controlled Receive Slip Positives Errors detected on this port. | long | |
| rt_PortCurrentContolledRxSlipNegatives | Displays the number of Controlled Receive Slip Negatives Errors detected on this port. | long | |
| rt_PortCurrentContolledTxSlipPositives | Displays the number of Controlled Transmit Slip Positives Errors detected on this port. | long | |
| rt_PortCurrentContolledTxSlipNegatives | Displays the number of Controlled Transmit Slip Negatives Errors detected on this port. | long | |
| rt_PortCurrentLineErroredSeconds | Displays the number of Errored Seconds in the line detected on this port. | long | |
| rt_PortCurrentPathCodeViolations | Displays the number of Path Code Violations detected on this port. | long | |
| rt_PortCurrentLineCodeViolations | Displays the number of Line Code Violations detected on this port. | long | |
| rt_PortExcessiveZeroes | Displays the number of Excessive Zeroes detected on this port. | long | |
| rt_PortBipolarviolations | Displays the number of Bipolar Violations detected on this port. | long | |
| rt_PortBurstyErrorSeconds | Displays the number of Bursty Errored Seconds detected on this port. | long | |
| rt_PortNormalErrorSeconds | Displays the number of Normal Errored Seconds detected on this port. | long | |
| rt_PortUnavailableSeconds | Displays the number of Unavailable Seconds detected on this port. | long | |
| rt_PortRxBusy | Displays the number of Receive Busy Errors detected on this port. | long | |
| rt_PortTxNoValidData | Displays the number of Transmit No Valid Data Errors detected on this port. | long | |
| rt_PortRxFrames | Displays the number of received frames on this port. | long | |
| rt_PortRxBytes | Displays the number of received bytes on this port. | long | |
| rt_PortRxAborts | Displays the number of Receive Aborts Errors detected on this port. | long | |
| rt_PortRxNonOctets | Displays the number of Receive Non-Octets Errors detected on this port. | long | |
| rt_PortRxCRCErrors | Displays the number of Receive CRC Errors detected on this port. | long | |
| rt_PortRxOverruns | Displays the number of Receive Overruns Errors detected on this port. | long | |
| rt_PortRxHwErrors | Displays the number of Receive Hardware Errors detected on this port. | long | |
| rt_PortRxBadAddress | Displays the number of Receive Bad Address Errors detected on this port. | long | |
| rt_PortRxCDLost | Displays the number of Receive CD Lost Errors detected on this port. | long | |
| rt_PortRxNoBuffer | Displays the number of Receive No Buffer Errors detected on this port. | long | |
| rt_PortRxInternalTableOverflow | Displays the number of Receive Internal Table Overflow Errors detected on this port. | long | |
| rt_PortRxMaxBacklog | Displays the number of Receive Max Backlog Errors detected on this port.. | long | |
| rt_PortTxFrames | Displays the number of transmitted frames on this port. | long | |
| rt_PortTxBytes | Displays the number of transmitted bytes on this port. | long | |
| rt_PortTxUnderruns | Displays the number of transmitted underruns on this port. | long | |
| rt_PortTxCollisions | Displays the number of transmitted collisions on this port. | long | |
| rt_PortTxInvalidData | Displays the number of Transmit Invalid Data Errors detected on this port. | long | |
| rt_PortTxInternalTableOverflow | Displays the number of Transmit Internal Table Overflow Errors detected on this port. | long | |
| rt_PortTxMaxBacklog | Displays the number of Transmit Max Backlog Errors detected on this port. | long | |
| rt_PortRxCount | Displays the number of recieved frames on this port. | long | |
| rt_PortRxICount | Displays the number of received I (information) frames on this port. | long | |
| rt_PortRxSCount | Displays the number of received S (supervisor) frames on this port. | long | |
| rt_PortRxUNCount | Displays the number of received UN (unnumbered) frames on this port. | long | |
| rt_PortRxUA | Displays the number of received UA (unnumbered ack) messages on this port. | long | |
| rt_PortRxSABME | Displays the number of received SABME (Set Asynchronous Balanced Mode Extended) messages on this port. | long | |
| rt_PortRxDISC | Displays the number of received DISC (disconnect) messages on this port. | long | |
| rt_PortRxDM | Displays the number of received DM (disconnected mode) messages on this port. | long | |
| rt_PortRxFRMR | Displays the number of received FRMR (frame reject) messages on this port. | long | |
| rt_PortRxRR | Displays the number of received RR (receive ready) messages on this port. | long | |
| rt_PortRxRNR | Displays the number of received RNR (receive not ready) messages on this port. | long | |
| rt_PortRxREJ | Displays the number of recieved REJ (reject) messages on this port. | long | |
| rt_PortRxEstReq | Displays the number of times this port was in established request state. | long | |
| rt_PortRxRelReq | Displays the number of times this port was in release request state. | long | |
| rt_PortRxDataReq | Displays the number of times this port was in data request state. | long | |
| rt_PortTxCount | Displays the number of transmitted frames on this port. | long | |
| rt_PortTxCountBusy | Displays the number of transmitted busy frames on this port. | long | |
| rt_PortTxUA | Displays the number of transmitted UA (unnumbered ack) messages on this port. | long | |
| rt_PortTxSABME | Displays the number of transmitted SABME (Set Asynchronous Balanced Mode Extended) messages on this port. | long | |
| rt_PortTxDISC | Displays the number of transmitted DISC (disconnect) messages on this port. | long | |
| rt_PortTxDM | Displays the number of transmitted DM (disconnected mode) messages on this port. | long | |
| rt_PortTxFRMR | Displays the number of transmitted FRMR (frame reject) messages on this port. | long | |
| rt_PortTxRR | Displays the number of transmitted RR (receive ready) messages on this port. | long | |
| rt_PortTxRNR | Displays the number of transmitted RNR (receive not ready) messages on this port. | long | |
| rt_PortTxREJ | Displays the number of transmitted REJ (reject) messages on this port. | long | |
| rt_PortTxICount | Displays the number of transmitted I (information) messages on this port. | long | |
| rt_PortLinkDownCount | Displays the number of link DOWNs on this port. | int | |
| rt_PortLinkUpCount | Displays the number of link UPs on this port. | int | |
| rt_PortLineStatusChangeTrapEnable | Displays whether the trap for status change is enabled on this port. | int | |
| rt_PortSeverelyErroredSeconds | Displays the number of severely errored seconds on this port. | int | |
| rt_PortDegradedMinutes | Displays the number of degraded minutes on this port. | int | |
| rt_PortControlledSlipSeconds | Displays the number of seconds containing one or more controlled slips on this port. | int | |
| rt_PortCurrentActiveCalls | Displays the number of active calls currently on this port. | int | |
| rt_PortTotalCallsProcessed | Displays the total number of calls on this port. | int | |
| rt_PortTotalErroredCalls | Displays the total number of errored calls on this port. | int | |
| rt_PortTotalRefusedCalls | Displays the total number of refused calls on this port. | int | |
| rt_PortTotalConnectedCalls | Displays the total number of calls connected on this port. | int | |
| rt_PortTotalBlockedCalls | Displays the total number of blocked calls on this port. | int | |
| rt_PortIncomingCallattempts | Displays the number of incoming calls attempted on this port. | int | |
| rt_PortIncomingCallaccepts | Displays the number of incoming calls that were accepted on this port. | int | |
| rt_PortIncomingCallrejects | Displays the number of incoming calls that were rejected on this port. | int | |
| rt_PortIncomingCallcompletes | Displays the number of incoming calls that were completed on this port. | int | |
| rt_PortIncomingBlockedCalls | Displays the number of incoming calls that were blocked on this port. | int | |
| rt_PortIncomingCurrentCalls | Displays the number of current incoming calls on this port. | int | |
| rt_PortOutgoingCallattempts | Displays the number of outgoing calls attempted on this port. | int | |
| rt_PortOutgoingCallaccepts | Displays the number of outgoing calls accepted on this port. | int | |
| rt_PortOutgoingCallrejects | Displays the number of outgoing calls rejected on this port. | int | |
| rt_PortOutgoingCallcompletes | Displays the number of outgoing calls completed on this port. | int | |
| rt_PortOutgoingBlockedCalls | Displays the number of outgoing calls blocked on this port. | int | |
| rt_PortOutgoingCurrentCalls | Displays the number of current outgoing calls on this port. | int | |
| rt_PortCountersLastResetTime | Displays the last reset time of the counters on this port. | int | |
| rt_PortCountersPullTime | Displays the time(in epoch-seconds)at which the counters pull happened on this port. | int | |
| rt_BusyHourCallAttempts | Displays the BHCA rate for this port. | int | |
| rt_BusyHourCallCompletions | Displays the BHCC rate for this port. | int |
Overview
Content Tools