You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In this section:

Unable to show "metadata-from": No such page "_space_variables"
 supports forking of media streams to Media Capture Tool (MCT). The criteria for recording calls is configured in PSX and when a call meets the criteria, PSX indicates the need for media forking in the Policy Response to SBC.

To View Mct

On SBC main screen, go to Troubleshooting > Call Trace/Logs/Monitors > Monitor Configuration > Monitor Endpoint >  Mct.

The Mct window is displayed.

Troubleshooting - Monitor Endpoint - Mct List

To Edit Mct

To edit any of the Mct in the list, click the radio button next to the specific Mct name.

Troubleshooting - Monitor Endpoint - Mct List Highlighted

The Edit Selected Mct window is displayed below.

Troubleshooting - Monitor Endpoint - Mct List Edit

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create Mct

To create a new Mct, click New Mct tab on the Mct List panel.

Troubleshooting - Monitor Endpoint - Mct List Field

The Create New Mct window is displayed.

Troubleshooting - Monitor Endpoint - Mct List Create

The following fields are displayed:

Mct Parameters

Parameter

Description

Name

Specifies the name of the Monitor Endpoint.

Trunk Group

Specifies the name of the Trunk Group used by Media Capture Tool (MCT).

Ip Address

Specifies the logical IP Address of the interface.

Port Number

Specifies the UDP/TCP port number of SIP Signaling Port.

State

Specifies the administrative state of the Media Capture Tool.

The options are:

  • enabled
  • disabled

To Copy Mct

To copy any of the created Mct and to make any minor changes, click the radio button next to the specific Mct to highlight the row.

Troubleshooting - Monitor Endpoint - Mct List Highlighted

Click Copy Mct tab on the Mct List panel.

Troubleshooting - Monitor Endpoint - Mct List Field

The Copy Selected Mct window is displayed along with the field details which can be edited.

Troubleshooting - Monitor Endpoint - Mct List Copy

Make the required changes to the required fields and click Save to save the changes. The copied Mct is displayed at the bottom of the original Mct in the Mct List panel.

To Delete Mct

To delete any of the created Mct, click the radio button next to the specific Mct which you want to delete.

Troubleshooting - Monitor Endpoint - Mct List Highlighted

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Troubleshooting - Monitor Endpoint - Mct List Delete Confirmation

Click OK to remove the specific Mct from the list.

  • No labels