You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

The Sonus SBC 1000/2000 Web interface includes a built-in step-by-step setup Easy Configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 and Skype for Business/Lync for various options, as well as SIP with IP Phones. Based on a template, you are able to configure items such as endpoint (define user and provider), routing (routing configuration applied to scenario), and country (tone table parameters and emergency numbers for a particular country). Through this method, you can easily configure the SBC according to your topology.

The wizard produces three different configuration options, depending on the desired deployment:

  • SIP  ↔ Microsoft UC
  • SIP  ↔ ISDN PBX
  • SIP ↔ IP Phones
  • ISDN PSTN ↔ Microsoft UC
  • FXO ↔ Microsoft UC

Run the Easy Configuration Wizard

If the Easy Configuration Wizard is run a second time, it will always create new configuration elements for the scenario being setup. Updates will not be made to the previous configured items.

SBC Easy Configuration supports IPv4 only, not IPv6.

The Easy Config wizard functionality is available through the following two methods:

Run via Initial Setup

Access the Easy Config wizard during during Initial Setup:

  1. Configure the desired fields. See Sonus SBC 2000 - Initial Setup or Sonus SBC 1000 - Initial Setup.
  2. From the Easy Setup drop down list, select Launch on First Login.
  3. Click Apply. The Easy Config Wizard is presented after login for immediate configuration.
  4. Select the desired template and configure. See Working with SBC Easy Configuration.

Run via Easy Config Wizard

If the Easy Setup option is not enabled or configured during the Initial Setup (Sonus SBC 2000 - Initial Setup or Sonus SBC 1000 - Initial Setup) process, it can be accessed through the WebUI Task's tab.

Access the Easy Config wizard:

  1. In the WebUI, click the Tasks tab.
  2. In the left navigation pane, go to SBC Easy Setup > Easy Config Wizard. The Easy Configuration screens are displayed. 
  3. Select the desired template and configure. See Working with SBC Easy Configuration.

 

 

 

 

  • No labels