For SWe Lite Music On Hold, refer to Configuring SBC SWe Lite for Music On Hold
This article explains setting up
Maximum File Size
Platform | Maximum |
---|---|
Unable to show "metadata-from": No such page "_space_variables" | 1 MiB |
Unable to show "metadata-from": No such page "_space_variables" | 4 MiB |
Upload the file using the Uploading a Sound File procedure in Uploading Music on Hold Files.
Specify the live audio source using the Specifying a Live Audio Source procedure in Configuring the Media System.
Connecting an audio source for Music On Hold requires the use of an adapter between
Music On Hold volume is controlled from the audio source device (iPod, MP3 Player, etc.). The preferred volume level can be adjusted by listening to the stream, or by examining the RTP trace captured from the SIP call leg of the call. Use the receive gain settings on the FXS port to make any additional fine-tuning volume adjustments.
Enable Music on Hold as follows:
In the WebUI, click the Settings tab.
In the left navigation pane, go to System > DSPs.
The Music on Hold File Status will show as Loaded if the file was successfully uploaded.
Verify Upload
Under certain conditions, after multiple, consecutive attended transfers, Music On Hold will not be heard on the SIP phone when the call is put on hold.