To assign a virtual NIC to a physical network adaptor, refer to the respective third-party documentation:
KVM Hypervisor: http://www.linux-kvm.org/page/HOWTO
Microsoft Hyper-V: https://technet.microsoft.com/en-us/library/mt169373(v=ws.11).aspx
VMware ESXi: https://www.vmware.com/support/pubs/
Log in as user netconfig
with password as Config!
. Change the password when prompted.
Modify Password
Static or DHCP IP
Choose DHCP or enter a static IP address.
Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): n
Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.
The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI.
Use the MAC address identified previously in the virtual machine editing portion to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.
mgt0
.Enter an Ethernet 1 Media interface name. Example: pkt0
.
Enter each subsequent Ethernet Media interface Name, and then apply the changes.
Saving Interface Mapping