You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Current »

Not supported by SBC SWe Lite in this release.

This operation allows you to start and stop the following SBA services from the WebUI:

  • Lync Server 2010 Services:
    • Mediation Service
    • Front-End Service
  • Remote Desktop Service for the ASM

If stopped, the Remote Desktop service will start after the ASM is restarted only if it is configured as enabled in the ASM IP settings.

Starting and Stopping an SBA Service

  1. In the WebUI, click the Tasks tab.
  2. In the left navigation pane, under the Lync™ Survivable Branch Appliance, click Start/Stop Services.

    Start/Stop Survivable Appliance Services

  3. In the Service Action, select the desired operation
  4. In the Service Name, select the service you wish to start/stop
  5. Click OK- the following status messages will be dispatched:
    1. The operation being applied on the ASM:

      Operation Applied on ASM

    2. The operation completes:

      Operation Complete

       

       

  • No labels