In this section:
In the left navigation pane, go to Protocols > IP > Static Routes.
Static IP Route Table
The SBC supports IPv4 addresses for this feature; IPv6 is not supported. See Managing Static IPv6 Route Tables.
Click the Create Static IP Route (
) icon at the top of the Static IP Route Table page.Create Static IP Route Entry
Specifies the destination IP Address
Specifies the network mask of the destination host or subnet. If the 'Destination IP Address' field and 'Mask' field are both 0.0.0.0, the static route is called 'default static route'.
Specifies the IP Address of the next-hop router to use for this Static Route.
Specifies the cost of this route and hence indirectly specifies the preference of the route. Lower values indicate more preferred routes. Typical value is 1 for most static routes indicating that static routes are preferred to dynamic routes.