You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Table of Contents
About this Page
  • This Interoperability Note describes how to integrate a 
    Unable to show "metadata-from": No such page "_space_variables"
    directly to Exchange 2013
  • This document presumes the reader is familiar with configuring Exchange and the
    Unable to show "metadata-from": No such page "_space_variables"

Prerequistes

Requires Sonus SBC1000/2000 Version 3.0

Exchange 2013

Interoperation Notes

The following instructions detail configuring both Exchange 2013 and Sonus 

Unable to show "metadata-from": No such page "_space_variables"
to interoperate via TCP.  It is suggested that any integration attempt begin with TCP and move to TLS, if required, only after ensuring the Exchange <> SBC connection is fully functional.

  • Exchange = demo4.sbc.net  (10.1.1.4)
  • SBC = sbc2000.sbc.net (10.1.1.74)

Exchange 2013 Configuration

Use the following to configure Exchange 2013 to accept and process calls sent directly from

Unable to show "metadata-from": No such page "_space_variables"
.

 

  1. Connect to the Exchange Admin interface via your web browser.

    Connect to Exchange Admin

     

     

  2. Select Unified Messaging.

    Unified Messaging

     

     

  3. Select UM dial plans.

    UM Dial Plans

     

     

  4. Add a new UM dial plan.  Add a dia plan to support the Exchange <> SBC connection. 

    Lync and PBX dial plans are different.  You should not attempt to use a Lync dial plan to support the Exchange <> SBC connection.

    Add new UM Dial Plan

    New UM Dial Plan

     

     

     

  5. Create a UM IP gateway.  Create an entry in Exchange for the SBC gateway.

    UM IP Gateway

     

    Add new UM IP Gateway



    New UM IP Gateway

     

     

  6. Modify the newly created UM dial plan.

    UM Dial Plan

    Modify new UM Dial Plan

     

     

  7. Configure/verify Outlook Voice Access.

    Configure Dial Plan

    Outlook Voice Access

     

    Dialing Rules

    Dialing Authorization

    Transfer and Search

     

     

  8. Add a UM Mailbox Policy to the dial plan.

    Add UM Mailbox Policy

     

    New UM Mailbox Policy

     

     

     

     

  9. Modify/verify the newly created UM Mailbox Policy.

    Modify new UM Mailbox Policy

    General

    Dialing Authorization

     


     

  10. Add a UM Auto Attendant.

    Add UM Auto Attendant

    New UM Auto Attendant

     

     

     

  11. Modify/verify the newly created UM Auto Attendant.

    Modify new UM Auto Attendant

    Address Book and Operator Access

    Dialing Authorization

     

     

  12. If a UM Hunt Group if a default does not already exist.

    UM Hunt Group

     

     

     

  13. Add users to the newly created SBC dial plan.  Adding extensions is accomplished via a user's Unified Messaging configuration.

    Add Users

    Other Extensions

    Add Another Extension

Configure the SBC 1k/2k

The next section covers configuring the SBC 1k/2k to interface to the Exchange server.

 

  1. Browse to the Sonus SBC 1k/2k.

    Browse to Sonus SBC 1000/2000

     

     

  2. Create/verify SIP Profile.

    Create SIP Profile

    SIP Profile Entry

     

     

  3. Create a SIP Server Table for the Exchange Server.

    SIP Server Table

    Create SIP Server Table

     

     

     

  4. Add the Exchange Server to the newly created SIP Server Table.

    Add Exchange Server

    Create SIP Server Entry

     



  5. Create a Transformation Table and Transformation Entries to be used to process calls sent from Exchange's Subscriber Access (SA) and Automated Attendant (AA) to the SBC.  In the example below, no manipulation is performed on the calls received from Exchange.   Adjust your configuration according to your specific needs.

    Transformation Table

    Create Transformation Table

    Passthrough Untouched

     

     

  6. Create a Call Routing Table to process incoming calls from the Exchange SA and AA.

    Call Routing Table

    Create Call Routing Table

     

     

  7. Create a SIP Signaling Group to process incoming SIP calls from the Exchange Subscriber Access and Automated Attendant.

    SIP Signaling Group

    SIP Signaling Group Details

     

     

  8. Create entries in the Call Route Table.  These call route entries process incoming calls from the Exchange Subscriber Access and Auto Attendant.  Create a call route for every possible destination for Exchange SA/AA calls.

    Create Routing Entry

    Create Call Routing Entry

     

     

  9. In addition to the above configuration that supports incoming calls from Exchange, you will need to create corresponding configurations to route calls to Exchange from other sources (such as PSTN and PBXs).  It is strongly recommended that transformations for Exchange SA/AA appear at the top any transformation table. These entries not only handle the initial calls to Exchange, but also the 302 from Exchange (used during the call setup).

    Not placing the Exchange transformations at the top of the transformation table may cause the 302 to fail, which will cause the calls to Exchange to fail.

    Call to EUM

     

     

     

When configuring for TLS, in Exchange Configuration, Step 5, change the SBC address to the SBC's FQDN rather than IP.

It has been reported that when a Exchange user has extensions for both Lync and direct-to-SBC dial plans that Exchange will send Message Waiting Indicator status only to the Lync extension. Exchange will not send MWI to a user's telephone extension when that user also has a Lync extension.

  • No labels