Configuring the Lync 2010 Server - Dial Plan and Gateway

1. Connect to the Microsoft Lync 2010 Front End Server.
   There are two methods:
   1. Connect via Remote Desktop, or
   2. Connect via your web browser (https:\\<Server FQDN>\CSCP)

2. Launch the Lync Server Control panel.

   Lync Server Control Panel

Adding a Dial Plan

1. Select Voice Routing

   Site Dial Plan

2. In the New menu, click Site dial plan.

   Select Site Location

3. Select your Site location.

4. Click OK.

   New Dial Plan

5. Click OK.

   Commit All

6. In the Commit menu, click Commit all

   Commit

7. Click Commit.
8. Click Close.

Adding a Voice Policy

New Site Policy

1. Click the voice Policy Tab

2. In the New menu, click Site policy.

   Select Site Location

3. Select the Site location.

4. Click OK.

   New Associated PSTN Usages

5. Under Associated PSTN Usages, click New.

   Usage Record Name

6. In the Name text box, enter a name for the usage record.

7. Click New.

   Route Name

8. In the Name text box, enter a name for the route.

9. Next to the Associated gateways text box, click Add.

   Select Gateway

10. Select the gateway to associate with the site.

11. Click OK.

    OK New Route

12. Click OK.

    Save PSTN Usage Record

13. Click OK to save your PSTN Usage record

    Save Voice Policy

14. Click OK to save the voice policy.

    Commit All

15. In the Commit menu, select Commit all.

    Commit

16. Click Commit.

    Successfully Published

17. Click Close.

Adding a Trunk Configuration

New Site Trunk

1. Click the Trunk Configuration tab.

2. In the New menu, select Site trunk.

   Select Site Location

3. Select the appropriate site location.

4. Click OK.

   New Trunk Configuration

5. Select Enable media bypass.

6. Click OK to save your selections.

   Commit All

7. In the Commit manu, select Commit all

   Commit

8. Click Commit to published the voice routing configuration.

   Successfully Published