CAM Changes in This Release

Accounting File Version Change

The CAM version of 

For more information, refer to the section Billing Introduction.

CAM Field Changes

New Accounting Record Fields in Release 09.02.00

• New Call Accounting CDR fields are added in support of feature SBX-92556 which introduced beep tones for recorded calls. 

  Field name	ASCII Accounting
  	Max ASCII Length	Type	Record Number
  			START	STOP	ATTEMPT	INTERMEDIATE
  Beep Tone Inserted	1	Decimal	NA	289	NA	NA
  Direction of Beep Tone	1	Decimal	NA	290	NA	NA

• New CDR fields are added in support of feature SBX-92556 CDR records in local time zone format.

  Field name	ASCII Accounting
  	Max ASCII Length	Type	Record Number
  			START	STOP	ATTEMPT	INTERMEDIATE
  Start Time (Local)	21	Characters	190	291	208	182
  Disconnect Time (Local)	21	Characters	NA	292	209	NA
  Intermediate Time (Local)	21	Characters	NA	NA	NA	183
  Call Established Time (Local)	21	Characters	191	293	210	184

• New EVENT and RECORDING records are added in support of feature SBX-92556 CDR records in local time zone format.
  
  New EVENT record:

  Field Name	Field Number	Description
  SIP Request Start Time (Local)	37	Max length 21 Date/time format: mm/dd/yyyy hh:mm:ss.d

  New RECORDING records:

  Field	Length	Type	Record number	Comment
  Start Time (Local)	21	Characters	29	mm/dd/yyyy hh:mm:ss.d  Local date and time stamp when Setup Request was sent.
  Disconnect Time (Local)	21	Characters	30	mm/dd/yyyy hh:mm:ss.d  Local date and time stamp when Disconnect Request was received.

• New system-level CDR fields are added in support of feature SBX-92556 to support CDR records in local time zone format.
  

  Field Name	Max Length in ASCII Characters	Type	REBOOT	SWITCHOVER	SW_CHANGE
  			Record Number
  Boot Time (Local)	21	Characters	8	8
  Record Time (Local)	21	Characters			9

• The maximum length of the following fields changed to the values indicated below:
  • Ingress Protocol Variant Specific Data: 4794
  • Egress Protocol Variant Specific Data: 4794
    
    
• The following CDR field are added to log the attestation level in START & STOP records for all STIR services as part of feature SBX-92556. Possible values are A, B or C.
  • The Ingress Protocol Variant Specific Data is updated with data based on ingress signaling.
  • The Egress Protocol Variant Specific Data is updated with data received from the PSX, if available.

  • If PSX data is not available, received Ingress signaling data is populated in the Egress PVSD.

    Field name	ASCII Accounting
    	Max ASCII Length	Type	Record Number
    			START	STOP	ATTEMPT	INTERMEDIATE
    Ingress PVSD Attestation-Indicator	1	Characters	42.83	52.83	45.83	38.83
    Egress PVSD Attestation-Indicator	1	Characters	55.83	69.83	59.83	51.83

• The following SIP Variant sub-fields are added as part of SBX-101975 STIR RPH feature:

  • STI RPH Service Type (Field 84)

  • STI RPH Service Status (Field 85)

  • STI RPH Reason Code (Field 86)
    
    

New Accounting Record Fields in Release 09.01.00

The following changes are captured in the 09.01.00 Release. 

SIP Variant Sub-Field

In START and STOP records:

• The SIP variant sub-field 82 under Ingress Protocol Variant Specific Data is populated with the value "nchg" when call processing leads the SBC including a "no-charge notification" (P-K-Info:nchg header) in 18x responses. Otherwise, it is empty. For more information, refer to SIP Variant Sub-field Descriptions and Sending a No-Charge Notification to the Ingress Call Leg.