Page History

FIRST STEPS - Identify the Correct Release and 

Spacevars
0 series3

ID

Before generating an 

• Confirm the 

  Spacevars
  0 series3 1 bold

  was first installed and activated (whether on-premises or in public deployments) with Release 9.0.0, 8.1.5 or later, or Release 8.0.4 software (to identify the

  Spacevars
  0 series3

  's software release, refer to Viewing the Software Version and Hardware ID (SBC 1000/2000, SBC SWe Edge)). If the 

  Spacevars
  0 series3

  was initially installed and activated with Release 8.1.0 or 8.0.3 or earlier, do not generate a license file from this portal at this time. Instead, disregard all further actions on this page and contact Ribbon support for the next steps.  An attempt to generate a license without Ribbon support results in an 

  Spacevars
  0 series3

  operation failure, and delays the roll-out of SBC services.
• When submitting the 

  Spacevars
  0 series3 1 bold

  ID to generate the license file, confirm you are using the correct 

  Spacevars
  0 series3 1 bold

  ID value: a 32 character string found in the Release 9.0.0, 8.0.4, or 8.1.5 System Overview display.

Before generating a license, identify the 

1. In the WebUI, click the System tab.
2. In the System page, click the Overview tab.
3. Identify and record the the correct 

   Spacevars
   0 series3

   ID (see Figure 1 as an example) before generating a license, and proceed to Prerequisites.
   

Anchor
prereq prereq

Prerequisites

Ordering Production Licenses

A software license must be purchased from Ribbon Sales. To purchase a license, contact Ribbon as follows:

• Contact a Ribbon Partner
• Contact Sales and Support: 1-833-742-2661
• Fill out the Contact Form (https://ribboncommunications.com and click Contact)
  

Once the license is purchased, you will receive instructions via email for accessing the licensing portal.

Available licenses for purchase are as follows:

• Licenses for public cloud (e.g. Microsoft® Azure™ and Amazon Web Services (AWS)) deployments: Working with Licenses.
  
• Licenses for on-premises VMM (Virtual Machine Monitor) deployments (e.g. KVM, Microsoft Hyper-V, or VMware ESXi): Working with Licenses.

Prerequisites for Microsoft® Azure™-Based 

Spacevars
0 product3

 Production License Installation

Follow these prerequisites before generating a production license:

1. Deploying an SBC SWe Edge from the Azure Marketplace
2. Running Initial Setup on SBC SWe Edge.

Prerequisites for Amazon Web Services (AWS)-Based 

Spacevars
0 product3

 Production License Installation

Follow these prerequisites before generating a production license:

1. Deploying an SBC SWe Edge via Amazon Web Services - AWS

2. Running Initial Setup on SBC SWe Edge.

Prerequisites for On-Premises Based 

Spacevars
0 product3

 Production License Installation

Follow these prerequisites before generating a production license:

1. Downloading the SBC SWe Edge Package for On-Premises Deployment
2. Installing SBC SWe Edge
   1. Installing SBC SWe Edge on KVM Hypervisor
   2. Installing SBC SWe Edge on VMware ESXi
   3. Installing SBC SWe Edge on Microsoft Hyper-V
3. Running Initial Setup on SBC SWe Edge.
   

Anchor
generate_install generate_install

Generating and Installing an 

Spacevars
0 product3

 Production License

Generate and install a license as follows:

1. Locate and record the 

   Spacevars
   0 product3

   ID. Refer to Viewing the Software Version and Hardware ID (SBC 1000/2000, SBC SWe Edge).

2. Access the Self-Service Licensing and Download Portal and enter credentials.

   

   
   

3. Click Generate License Key.

4. Click Configuration.

   Info
   title SBC SWe Edge ID and Email - Additional Notes
   In some instances the  Spacevars 0 series3 ID may be named Spacevars 0 series3  ID#. The string under Hardware ID(s): should be equivalent to the Spacevars 0 series3 1 bold  ID you submitted when you generated your license. If different, re-visit your email inbox for another email or, alternatively, contact Ribbon Customer Support.

   
   

5. Enter the

   Spacevars
   0 series3 1 bold

    ID in the UUID#1 field and click Generate. Within 24 hours, you will receive an email (check spam folder, clutter, etc).

   

   Info
   If you do not receive your email within 24 hours, re-visit your email inbox and check spam, clutter, etc. If still not found, contact Ribbon Customer Support.

   
   

   Info
   This email includes the Management ID. For information about how to apply the Management ID, refer to either Configuring for Ribbon Application Management Platform during Initial Setup or Configuring for Ribbon Application Management Platform at Node-level.

   
   

   The following is an example of the email you will receive.

   Note
   title Caution
   You cannot use the Management ID as it appears in the email unless it contains colons. If the Management ID in the email does not have colons, refer to the Management ID instructions in either Configuring for Ribbon Application Management Platform during Initial Setup or Configuring for Ribbon Application Management Platform at Node-level.

   

   
   

6. Save the file attachment (license file in .XML format) to your PC.
7. In the WebUI, click the Settings tab.
8. Access Licensing > Install New License.
9. Click Choose File.
10. Select the license file you saved from the Ribbon email, and click Open.
11. Click Decode to confirm license is correct before applying.
12. Click Apply.
    

13. To view currently installed licenses, access System > Licensing > Current Licenses.

    Note
    A reboot is recommended after applying a new license.

    
    

Next Steps

Configure the