Page History

...

1. Log in as user netconfig with password as Config!. Change the password when prompted.
   

   Note
   icon false title Note
   Passwords must be at least six characters in length and include uppercase and lowercase characters, and numerals.

   Caption
   0 Figure 1 Modify Password 3 Modify Password

   Caption
   0 Figure 1 Static or DHCP IP 3 Static or DHCP IP

2. Choose DHCP or enter a static IP address.
   

   Code Block
   Would you like to configure a static IP address for Initial Setup on the Admin interface? This is only required if DHCP is unavailable (y/[n]): n

    

   Note
   icon false title Note
   Sonus recommends that you first connect the admin port to a network with DHCP server enabled, otherwise you will need to enter a static IP address when prompted for an IP address.

3. Enter the interface name to map the interface as shown in the WebUI when prompted by the interface mapping shell script.

   Info
   title Info
   The interface mapping shell script requests that the user provide the interface name to map the interface as shown in the WebUI. Use the MAC address (identified previously in the virtual machine editing portion during Installing SBC SWe Lite on your specific platform) in order to correctly map the interface. The interface name and MAC address are required to properly activate the interface and have it appear on the WebUI.

4. Enter an admin interface name. Example: mgt0.

5. Enter an Ethernet 1 Media interface name. Example: pkt0.

6. Enter each subsequent Ethernet Media interface Name, and then apply the changes.

...