Page History

Overview

The SBC SWe Lite is a Microsoft-certified virtualized Session Border Controller (SBC) designed to provide small and mid-sized businesses interworking, security, and survivability for unified communications. The SWe Lite is available for deployment in Azure Marketplace as a BYOL (Bring Your Own License); it will be created as a virtual machine (VM) hosted in Azure. 

These instructions include how to configure and deploy the SBC SWe Lite in Microsoft Azure cloud. All configuration commands are via Azure Portal; the equivalent Powershell configuration comments are referenced here: Using Powershell Commands to Add Resource Groups and Virtual Networks in Azure.  

Step 1: Review Prerequisites

This section details the Microsoft Azure cloud computing requirements for hosting the SBC SWe Lite VM and SBC SWe Lite related resources.

Microsoft Azure Subscription

A Microsoft Azure subscription (with credit) is required. Refer to Microsoft Azure.

Azure Requirements for SBC SWe Lite Virtual Machine

Step 2: Create Resource Group

The Resource Group contains the necessary configuration for Azure to host the SBC SWe Lite VM and the SBC SWe Lite related resources. To deploy a an SBC SWe Lite in the Microsoft Azure cloud, the resource group is required for a Virtual Machine (VM).

...

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the menu, click Resource groups. For configuration of a Resource Group via Powershell refer to: Using Powershell Commands to Add Resource Groups and Virtual Networks in Azure.

3. Click Add. 

   
   

   Caption
   0 Figure 1 Add Resource Group via Portal
   Image Modified

   
   

4. Enter the Resource Group Name and click Review and Create. The Resource Group is validated.

   Caption
   0 Figure 1 Add Resource Group via Portal
   Image Modified

   
   

5.  

   Click Create. The Resource Group is added and listed in the list of Resource Groups.

   Caption
   0 Figure 1 Resource Group List
   Image Modified

   
   

Step 3: Create a Virtual Network and a Virtual Subnet

The Virtual Network interconnects the SBC SWe Lite with other equipment inside and outside Azure. The Virtual Subnet hosts the SBC SWe Lite IP addresses and are interconnected by the previously created Virtual Network. The SBC SWe Lite requires at least two Virtual Subnets, one for management and one for signaling/media. Even though management operations can be performed through the signaling/media subnet, for security reasons, Ribbon recommends disabling HTTP/HTTPS on the signaling/media subnet via ACL.

...

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the main menu, select Virtual Networks. For configuration of a Virtual Network and Virtual Subnet via Powershell refer to: Using Powershell Commands to Add Resource Groups and Virtual Networks in Azure.

3. Click the Add button.

   Caption
   0 Figure 1 Create Virtual Networks
   Image Modified

   
   

4. Enter the Virtual network information.  See below for example entries.

   Caption
   0 Figure 1 Create Virtual Network
   Image Modified

    

   
   

5. Click Create. The Virtual network is added and listed in the list of Virtual networks.

   Caption
   0 Figure 1 Add Virtual Network
   Image Modified

   
   

6. From the list of virtual networks, click on the newly created Virtual network (i.e., SWeLite-Network).

7. From Settings, select Subnets.

   Caption
   0 Figure 1 Select Subnet
   Image Modified

   
   

8. Click +Subnet. The Add subnet window is displayed.

9. Enter the required information.

   Caption
   0 Figure 1 Add Subnet Window
   Image Modified

   
   

10. Click OK. The subnet is added to the list of subnets.

    Caption
    0 Figure 1 Subnet List
    Image Modified

    
    

Step 4: Deploy SBC SWe Lite From Azure Marketplace

When the SBC SWe Lite image is deployed via Azure Marketplace, the image automatically appears in the general list of available images in Azure Portal. The single image can be used to deploy multiple SBC SWe Lite instances.

...

1. Connect to the Azure portal. Refer to portal.azure.com.

2. From the menu, click Create a Resource.

3. In the search bar, enter Ribbon and click <Enter>. Select Ribbon Session Border Controller (SBC) SWe Lite and click Enter.
    From the selections, click on SBC SWE Lite.
   

   
   

    

   Caption
   0 Figure 1 Search for Ribbon SWe Lite

   Image Removed

   Image Added

   
   

4. Review the product description and click Create.
   

   Caption
   0 Figure 1 Product Description

   Image Removed

   Image Added

   
   

5. In the Basics tab, configure the fields as described below.

6. From the Resource group drop down list in the left side menu, select the Resource Group created previously (i.e., SWeLite-RG)

   Info
   To view recommended VM sizes, refer to Virtual Machine Requirements - Microsoft Azure.

   
   

7. In Virtual machine name field, enter SWeLite.

8. In Size, click Change size to select the applicable VM size. To determine the required VM size, refer to Calculating Virtual Machine Requirements for an SBC SWe Lite. Supported VM sizes include:

   1. B1ms

   2. F1sB2s

   3. F2s

   4. DS1_v2

   5. DS3_v2F4s

9. In Authentication Type, click on Password.

10. Enter Username, Password, and Confirm Password.
    
    

    Caption
    0 Figure 1 Create a virtual machine - Basics
    Image Modified

     

    
    

11. Click Next: Disks.

12. From OS disk type drop down list, select Premium SSD.

    Caption
    0 Figure 1 Select Premium SSD
    Image Modified

     

    
    

    
    

13. Click Next: Networking.

14. Review and verify the default fields.
    
    

    Caption
    0 Figure 1 Create a virtual machine - Networking
    Image Modified

    
    

15.  Click Review + Create.

16. A screen indicates validation of the VM has passed.

    Caption
    0 Figure 1 Validation Passed
    Image Modified

    
    

17. Click Create. A VM status is displayed.

    Caption
    0 Figure 1 Create VM
    Image Modified

    
    When finished, this message is displayed: Your deployment is complete.

    
    

18. From the main menu, select Virtual Machines. The newly created SBC SWe Lite instance is displayed.
    
    

    Caption
    0 Figure 1 Select Virtual Machines

    Image Removed

     

    Image Added

    
    

Step 5: Create/Assign Signaling Network Interface on SBC SWe Lite

...

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the menu, select Virtual Machines
3. From the list of VMs, click the check box next to the desired SBC SWe Lite VM.

4. From the main menu select Stop and then Yes to acknowledge stopping the VM. Wait for the VM status to be Stopped (Deallocated), which can sometimes take a few minutes. Alternatively, right-click on the desired VM and select Stop.

   Caption
   0 Figure 1 SWe Lite VM - Stop function

   Image Removed

   Image Added

   
   

5. Click on the desired VM to view the settings.
6. From Settings > Networking, click Attach network interface.

7. Click Create network interface.
   
   

   Caption
   0 Figure 1 Select SWe Lite
   Image Modified

   
   

8. In the Create network interface window, enter the required information. Ensure you enter the signaling subnet address configured previously.
   
   

   Caption
   0 Figure 1 Create Network Interface
   Image Modified

   
   

9. Click Create.

10. Click Attach network interface and select the newly created Network Interface. Click OK.
    
    

    Caption
    0 Figure 1 Create Network Interface
    Image Modified

    
    

11. Confirm that your VM has two NICs.

    Caption
    0 Figure 1 Confirm NICs
    Image Modified

    
    

12. From  the list of VMs, select the SBC SWe Lite VM.
13. From the main menu select Start (alternatively, right-click on the desired VM and select Start).

Step 6: Connect to SBC SWe Lite via Azure Portal

Connect to the SBC SWe Lite via Azure Portal as follows:

1. Connect to the Azure portal. Refer to portal.azure.com.
2. From the menu, click Virtual Machines.
3. Click on the newly created SBC SWe Lite.

4. From Settings, select Networking.

5. Under Inbound port rules, restrict the HTTP and HTTPS access to pubic and private address. See below.

   Info
   To ensure the management interface for the SBC SWe Lite can only be reached from the IP address(es) you specify, restrict the HTTP and HTTPS access to your personal IP address (per previous step).

   
   

   Caption
   0 Figure 1 HTTP Configuration
   Image Modified

   
   

   Caption
   0 Figure 1 HTTPS Configuration
   Image Modified

   
   

6. Click Save.

    

   
   

   Info
   The Public IP and Private IP addresses in the example screen below; these values are required for subsequent SBC SWe Lite logins during Running Initial Setup on SBC SWe Lite.

   
   

   Caption
   0 Figure 1 Public and Private IP Addresses
   Image Modified

   
   

Step 7: Run Initial Setup

Proceed to SBC SWe Lite Initial Setup for initial configuration and next steps, which include how to access the WebUI and options to extend the SBC SWe Lite trial indefinitely. One initial setup is complete, return here to Step 8,

Step 8:

...

The SBC Edge is configured via Easy Configuration Wizard. 

1. Access the WebUI. Refer to Logging into the SBC Edge.
2. Click on the Tasks tab.
3. From the left side menu, click SBC Easy Setup > Easy Config Wizard.
4. From the Application drop down box, select the relevant Easy Configuration wizard. Depending on your network, follow a relevant Easy Configuration wizard. Refer to the table below for guidance.

    

   Caption
   0 Table 1 Easy Configuration - Microsoft Teams Direct Routing Configuration
   Deployment Type SIP Trunk ↔ Microsoft on Premises SIP Trunk ↔ ISDN PBX SIP Trunk ↔ IP Phones SIP Trunk ↔ IP PBX ISDN PSTN ↔ Microsoft on Premises FXO ↔ Microsoft on Premises (available for SBC 1000 and FXO Analog only) SIP Trunk ↔ Microsoft Teams ISDN PSTN ↔ Microsoft Teams IP PBX ↔ Microsoft Teams

5. The configuration wizard is complete.

Step 9: Test a Call

Calls can be tested via the SWe Lite's WEB UI.

...

...

License Installation

Trial License Installation

If you are installing an SBC SWe Lite instance in Azure for a trial or demonstration deployment, you can use the 30 day trial license that is included with SBC SWe Lite in Azure by default. If your trial or demonstration deployment lasts for more than 30 days, proceed to Obtaining and Installing a Permanent SWe Lite Trial License.

Production License Installation

...

If you are installing an SBC SWe Lite instance to carry live/production enterprise traffic, proceed to Obtaining and Installing an SBC SWe Lite Production License

.