Page History

...

1. Ensure that your Mitel 3300 ICP PBX has the necessary T1 PRI Module to Support T1 QSIG by navigating to: System Configuration / Units/Modules / Units Configuration Display.

    

   Image Modified

   Image Modified

   Image Modified

   
   
   
   

2. Create Class of Service for your QSIG trunk by using the following path to create a Class of Service for the QSIG trunk: System Configuration / Trunks / Class of Service Options Assignment.

   Image Modified

   Image Modified

   Image Modified

   Image Modified

   
   
   
   

3. Create a Link Descriptor Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Link Descriptor Assignment.

   Image Modified

   
   
   
   

4. Create a Digital Link Assignment by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Link Assignment.

   Image Modified

    

    

    

5. Add a MSDN-DPNSS-DASSII Trunk Circuit Descriptor by using the following path: System Configuration / Trunks / Digital Trunks / ISDN-PRI/MSDN-DPNSS-DASSII Trunk Circuit Descriptor.

   Image Modified

   Image Modified

   
   
   
   

6. Create a Trunk Service Assignment by using the following path to create a Trunk Service Assignment: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Trunk Service Assignment.

   Image Modified

    

    

7. Assign Digital Trunks by using the following path to assign Digital Trunks: System Configuration / Trunks / Digital Trunks / ISDN-PRI / Digital Trunk Assignment.

   Image Modified

   Image Modified

   
   
   
   

8. Add a Trunk Group for QSIG Using the following path: System Administration / Automatic Route Selection / Trunk Group Assignment. Next, create a new trunk group for QSIG and add trunk group members.

   Image Modified

   Image Modified

    

    

9. Add a Route Assignment by using the following path: System Administration / Automatic Route Selection / Route Assignment.

   Image Modified

   Image RemovedImage Added

   
   
   
   

10. Add a ARS Digits Dialed Assignment by using the following path to add ARS Digits Dialed Assignment: System Administration / Automatic Route Selection / ARS Digits Dialed Assignment.

    Image Modified

    Image RemovedImage Added

     

     

11. Under System Option Assignment, set the following fields as follows:
     
    1) Route Optimization Network ID: Select a unique number.
    2) DPNSS/QSIG Diversion Enabled: Select 'Yes'.

    Image Modified

     

     

     

12. Use the TDM document to configure

    Spacevars
    0 product

    .
    
    

    •  Configuring TDM ports on SBC Edge
    
    

13. Use the EUM integration document to finished the voicemail integration.
    
    •  Configuring SBC Edge with Exchange 2013