Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


CSS Stylesheet
img.confluence-embedded-image { display: inline-block !important; }

Add_workflow_for_techpubs
AUTH1UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a0c862eadf5e0163170affe7001b, userName='null'}
JIRAIDAUTHCHOR-5032
REV5UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV6UserResourceIdentifier{userKey=8a00a0c85bb25531015bc4122a4f00038a00a02355cd1c2f0155cd26cb8305e9, userName='null'}
REV3UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26c99e02c0, userName='null'}
REV1UserResourceIdentifier{userKey=8a00a02355cd1c2f0155cd26cc7d083d8a00a02355cd1c2f0155cd26cb230570, userName='null'}

The Link Monitor Configuration table is used to configure information for the following:

...

Backup Default Route. When the SBC 1000/2000 or SBC SWe Edge is configured to for Destination Resiliency (Backup Default Route), the Link Monitor checks for problems on the default route to the ISP. The SBC recognizes when the Internet destination is not reachable from a given (preferred) ISP; all subsequent calls are routed (via backup default route) to the secondary ISP to reach the intended Internet destination. For details on configuring a Backup Default Route, refer to Best Practice - Configure Destination Path Resiliency through Independent Internet Connections.

CAC/IPSEC is only applicable to the SBC 1000/2000.
Info
titleNote

The Backup Default Route feature is applicable to the SBC 1000/2000 and SBC SWe Edge.

For both SBC 1000/2000 and SBC SWe Edge, Monitor Type is a read-only option and is always set to Backup Default Route.

Note
iconfalse
titlePrerequisites

Applies only if the Monitor type is CAC/IPSEC.

The following items must be configured before a Link Monitor Configuration Table entry can be successfully created:


Working with Link Monitor Configuration Tables

Excerpt
  1. In the WebUI, click the Settings tab.
  2. In the left navigation pane, go to Protocols > Network Monitoring > Link Monitors Configuration.


...

To view a Link Monitor Configuration Table entry's properties:

Include Page
UXDOC122:_View_Entry_ValuesUXDOC122:
_View_Entry_Values
nopaneltrue

Include Page
UXDOC122:_Delete_Entry_ProcedureUXDOC122:
_Delete_Entry_Procedure
nopaneltrue

...