...
Log on to SBC BMC GUI using the IP address configured in one of the previous sections.
Tip | ||
---|---|---|
| ||
Use any one of the following methods to obtain the BMC IP address: - Configuring SBC 5400 BMC IP Address Via Serial Console Or |
The BMC Main Screen appears:
Caption | ||||
---|---|---|---|---|
| ||||
Navigate to Configuration > Platform Management Network tab. The Platform Management Network Settings screen is displayed.
Tip | ||
---|---|---|
| ||
Refer to SBC 5400 Media Ports and Operational Modes to know more about these four media ports and their operational modes. |
The SBC 5400 platform includes the following configurable media port configurations.
Caption | ||||
---|---|---|---|---|
| ||||
Tip | ||
---|---|---|
| ||
A message appears to enter the management IP addresses for the first time installation. |
If the management interfaces have not yet been configured, a warning message appears. Click OK to proceed with the Management Port configuration.
Caption | ||||
---|---|---|---|---|
| ||||
- IPv4 Address, Prefix and Default Gateway
- IPv6 Address, Prefix and Default Gateway
Tip | ||
---|---|---|
| ||
The IPv4 Address, Prefix and Default Gateway should be configured for Management Interface "0". For all other Management Interfaces, the settings are optional. |
Caption | ||||
---|---|---|---|---|
| ||||
Click Save.
Tip | ||
---|---|---|
| ||
Once you save the changes to the Management IP addresses, a warning message appears. Note that the changes to the Management IP addresses will only take effect when the SBC application is Installed (or re-Installed if already present). Refer to SBC 5400 - Installing Application for more information. |
Caption | ||||
---|---|---|---|---|
| ||||
Pagebreak |
---|