| Tip |
|---|
Usage of the Easy Config wizard to configure the Sonus SBC 1000/2000 does not modify existing configuration. The wizard will simply add the new configuration elements to the Sonus SBC 1000/2000. |
...
The Sonus SBC 1000/2000 Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy Sonus SBC 1000/2000 in an Enterprise's Lync environment with a SIP Trunk Provider to an IP phoneISDN PBX. The Sonus SBC 1000/2000 can be configured to use a SIP trunk to connect to IP phones an ISDN PBX using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATTAT&T IP Flexible Reach
- Generic SIP Trunk
- KDDI SIP Trunk
- Verizon Managed Service
- Broadsoft Trunk
...
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
...
Select the Application type (SIP Trunk ↔ IP PhonesISDN PBX). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
...
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
|  Image Removed Image Added
|
|
|
|
Application
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP PhonesISDN PBX.
|
Scenario Description
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enter the name to describe the SIP Trunk ↔ IP PhoneISDN PBX setup. | Info |
|---|
This value will be prefixed on all the Sonus SBC 1000/2000 configuration elements created by the Setup Wizard pertaining to this deployment. |
|
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The country in which the SIP Trunk ↔ IP PhonesISDN PBX originates. |
Emergency Services
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters. |
SIP Sessions
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960. |
...
SIP Trunk
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP trunk used for connection to the IP phonesISDN PBX. Valid options: Generic SIP Trunk, AT&T IP Flexible Reach, Verizon Managed Service, and Broadsoft KKDI SIP Trunk. The SIP Trunk selected determines the field options displayed in Step 2. See See Step 2 - Configure SIP Details for Endpoint. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
| Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.
This field is available only when the SIP Trunk type is Broadsoft Trunk. |
IP Phone Registrar
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the User Type as IP Phone Registrar. This field is fixed.is set to ISDN PBX |
Step 2 - Configure SIP Details for Endpoint
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Defines the number of users. Valid entry 1 - 1000. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Configure a network address and Netmask for the host or subnet in in which the IP phones reside. Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the (  Image Removed) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
|  Image Removed
|
|
|
Extension Length
AT&T IP Flexible Reach - Field Definitions
...
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | AT&T IP Flexible Reach |
|---|
| Image Added
 Image Removed |
|
|
|
Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Port Type is mandatory and the options are E1 or T1. Valid option: E1, T1 |
DS1 Ports
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
Switch Variant
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
ISDN Number Translation
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK.
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
...
PBX Prefix
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
|
Extension Length
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
|
Verizon Managed Service - Field Definitions
...
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
| 0 | Figure |
|---|
| 1 | Verizon Managed Service |
|---|
|  Image RemovedImage Added
|
|
|
|
Border Element Server
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The SIP Server Port number used for sending and receiving SIP messages between Sonus SBC 1000/2000 and the Border Element Server. |
...
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
...
Port Type is mandatory and the options are E1 or T1. |
DS1 Ports
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
...
Switch Variant
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
...
ISDN Number Translation
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
...
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
...
...
PBX Prefix
| Panel |
|---|
|
| Caption |
|---|
| Image Removed |
|
Broadsoft Trunk - Field Definitions
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
|  Image Removed
|
|
|
|
Server Domain
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The FQDN of the server domain. |
Enterprise Trunking
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field. |
IP Phone Numbering Plan
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension. |
Number of Users
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
| Define the number of users. Valid entry 1 - 1000. |
Protocol (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP. |
Port Number (IP Phone)
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
|
The Port Number used for sending and receiving messages between Sonus SBC 1000/2000 and the IP phone. Default entry: 5060. |
...
Extension Length
| Panel |
|---|
| bgColor | #FAFAFA |
|---|
| borderStyle | none |
|---|
| Configure a network address and Netmask for the host or subnet in which the IP phone resides. |
Network IP. IP address for the destination host or subnet in which the IP phone resides. Netmask. The network mask of the destination host or subnet in which the IP phones resides. To create a network address, click the ( Image Removed) icon. Enter the Network IP and Network Mask and click OK. | Caption |
|---|
|
|
Image Removed |
Step 3 - Confirm and Submit Configuration
...
| Section |
|---|
| Column |
|---|
| | Panel |
|---|
| | Caption |
|---|
|  Image RemovedImage Added
|
|
|
|