Page History

This section provides information on installing and running

Prerequisites

Perform the steps in Downloading the SBC SWe Lite Package before performing this procedure.

Install vSphere

Install the VMware vSphere Client

 If there is a need to access the ESXi server remotely, download and install vSphere Client to the desktop.

1. From the VMware ESXi Welcome page, click Download vSphere Client for Windows.

   Caption
   0 Figure 1 Download vSphere Client 3 Download vSphere Client

   
   

2. After installing, login to the vSphere Client using the appropriate login credentials.

   Caption
   0 Figure 1 Logon to VMware vSphere 3 Logon to VMware vSphere

3. Identify and reserve two static IP addresses for the Management and Media ports prior to creating the virtual

   Spacevars
   0 series3

   . 

   Note
   icon false title Note
   One IP address is required for the Management Portport, and one for the Media Portport. In the examples below, the Management Port is on the 10.56.230.x subnet and the Media Port is on the 10.56.227.x subnet.

Install SBC SWe Lite on the ESXi Server

1. Enter the ESXi server IP address into a browser address bar to login.

2. After logging on to the ESXi server, select Deploy OVF Template from the File drop-down list.

3. Select the location of the OVF package, and then click Next.

   Caption
   0 Figure 1 OVF Template Location 3 OVF Template Location
   Image Modified

4. When the OVF Template Details pane opens, make note of the information listed and then click Next.

   Caption
   0 Figure 1 OVF Template Details 3 OVF Template Details
   Image RemovedImage Added

5. When the Name and Location pane opens, rename the

   Spacevars
   0 series3

    instance to make it unique in the inventory folder, and then click Next.

   Caption
   0 Figure 1 Rename the File 3 Rename the File

6. Select the Resource Pool to deploy the template, and then click Next.

   Caption
   0 Figure 1 Select Resource Pool 3 Select Resource Pool

7. Ensure that the Thick Provision Lazy Zeroed option is selected in the Disk Format dialog box, and then click Next.

   Caption
   0 Figure 1 Disk Format 3 Disk Format
   Image RemovedImage Added

8. Review the Network Mapping dialog box. If necessary, select a different media port network interface from the Destination Networks drop-down list, and then click Next.

   Caption
   0 Figure 1 Network Mapping 3 Network Mapping
   Image Modified

9. Make note of the deployment settings, and then click Finish to start the deployment task.

   Caption
   0 Figure 1 Ready to Complete 3 Ready to Complete
   Image Modified

Edit the Virtual Machine Settings

1. Select the newly-created 

   Spacevars
   0 series3

   from the list in the left pane.

2. Select the Edit virtual machine settings link on the Getting Started tab.

Image Removed

Configuring Virtual Network Adapters

1. Select Network adapter 1 from the Hardware tab of Virtual Machine Properties.

2. In MAC Address section of the right window pane, select Manual. Default is Automatic.

   Note
   icon false title Note
   You must assign the MAC address manually. Do not accept the automatic default. The MAC address field is populated with the first three octets.

3. Finish configuring the static MAC address provided by your Network IT Administrator.

4. Repeat for the remaining four Network adapters (2 -5).

   Caption
   0 Figure 1 Configure Network Adapter 1

5. Configure at least two network interfaces for the appropriate network.

6. Click OK to save and then exit the Settings window.

    

7. Power on the

   Spacevars
   0 series3

    by selecting Power on the virtual machine link on the Getting Started tab.

   Caption
   0 Figure 1 Power on Virtual Machine 3 Power on Virtual Machine

8. Click the Console tab.

Complete Initial Setup

Proceed to SBC SWe Lite Initial Setup.